Here are some links that show digimodes operation and configuration in PowerSDR
"What Do I Need to Operate Digital Modes with PowerSDR "
"How to Setup VAC with PowerSDR "
--- In email@example.com, John Williams <KE5SSH@...> wrote:
> Another point - I am using PSDR 22.214.171.124 modified for softrock using an
> RXTX. I could not get the new flex one to work for xmit. Which level of
> PSDR 2.0 are you using?
> -------- Original Message --------
> Subject: Re: [softrock40] Digital modes using pwr sdr 2.0
> Date: Fri, 12 Aug 2011 08:07:52 -0500
> From: John Williams <KE5SSH@...>
> To: firstname.lastname@example.org
> Are you using a virtual serial port program? If so, is it configured
> correctly using the same signal lines on both sides? I can describe how
> mine is configured... I have mine configured to use both fldigi and
> JT65-hf without any reconfig. Just bring up psdr and then bring up
> whichever second digital mode app I want to run. Be glad to help you get
> this working.
> John ke5ssh
> On 8/12/2011 8:02 AM, gm3jsx wrote:
> > I have been trying for some time to get going on psk31 with pwr sdr v2.0..
> > I am using VAC with the settings that i have used with success on pwr
> > sdr v1.90 sr40..Although this receives ok i can't get it to operate
> > the ptt.If i manualy press mox it works ok..
> > Maybe i am missing something in the setup. Any help would be
> > appreciated...Jim gm3jsx
> John Williams