>If the tip and ring are reversed in PSDR you can not tune out the unwanted
image. In Winrad and Rocky you can do it in software. You are right though
when you say it reverses tuning i.e. LSB/USB are reversed and tuning up
tunes down and so forth
All that happens when reversing the connections is that the tuning is
reversed. This happens on all the software. PDSR is the one that has no way
Reversing the connections only affects the small amount of image
compensation provided by software. If the image rejection is not touched
then the hardware (Softrock) will provide around 30dB rejection whichever
way the audio is connected.
73 Alan G4ZFQ
Your message has been successfully submitted and would be delivered to recipients shortly.
Changes have not been saved
Press OK to abandon changes or Cancel to continue editing
Your browser is not supported
Kindly note that Groups does not support 7.0 or earlier versions of Internet Explorer.
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox. If you are using IE 9 or later, make sure you turn off Compatibility View.