The following is infomation on Eddy s pop-pop boat. The hull is a spare mloded hull from the Gaupner Pollux tug kit. Hope this helps. Please post info on theMessage 1 of 2 , Jun 21, 2007View Source
The following is infomation on Eddy's pop-pop boat. The hull is a spare mloded hull from the Gaupner Pollux tug kit. Hope this helps. Please post info on the progress of your project. Good luck.
Eddy's E-mail address: eddy@...
Graupner Pollux Freelance Design Tug 1:100 Scale Kit for Radio Control
This model is a freelance design of one of those tugs which can be found in any port. Despite her small dimensions (1:100th scale) Pollux is capable of tugging larger model ships and provides a most realistic impression.
Adequate space is available inside the hull for the accommodation of R/C equipment having normal dimensions; so there's no need for miniaturization of parts. Thanks to its moulded hull and extruded superstructures the model can be easily and quickly assembled.
Quickbuild plan with R/C installation, illustrated building instructions in Dutch, English, French and German. Moulded hull, superstructures, steering house with funnel, bridge and mast of ABS plastic. Die-cut wood parts, rudder shaft, decals miscellaneous plastic parts.
Forward - stop - backwards
Infinitely variable speed control
Length: 358 mm
Width: 114 mm
Draught: 40 mm
All up Weight: 620 g
Displacement (less R/C gear): 200 g
--- In email@example.com, "Xavier LUCAS" <lucas.xav@...> wrote:
> Hi Every body,
> I haven't find a conversation concerning this boat and I was wondering
> if Franck can tell us more about the boat (length, weight, size of the
> pop-pop boat).
> I am actually looking at the construction of my own radio controlled
> pop-pop boat. I have find an interesting plan of a boat which is
> originally a scull boat. The length is around 16" and the weight will
> be around a pound I think. I prefer to use a two exhaust pipe pop-pop.
> If some of you have some suggestion, they are welcome ...