... From: Frank McNeill Sent: Wednesday, October 26, 2011 11:52 PM ... One doesn t need wicks at all if one makes a VapourisingMessage 1 of 32 , Oct 26, 2011View Source--------------------------------------------------
From: "Frank McNeill" <frankmcneilll@...>
Sent: Wednesday, October 26, 2011 11:52 PM
> another wicked wick.One doesn't need wicks at all if one makes a Vapourising Burner.
While a wick lifts liquid fuel into the flame by capillary action, a
Vapouriser boils the fuel in the sump and burns the vapour. The fancy bits
of copper shown in the attachment transfer heat from the flame down to the
Probably too tall for the present need though, especially as the usual way
to start them is to put a tray of burning fuel underneath to start the
I have one such locomotive myself, burning methylated spirits which is
No Daryl, I had not found it, thanks! I ve now put these 2 links in my pop-pop bookmarks folder. So much great information is coming in via this thread that IMessage 32 of 32 , Oct 29, 2011View SourceNo Daryl, I had not found it, thanks! I've now put these 2 links in my pop-pop bookmarks folder.
So much great information is coming in via this thread that I am having difficulty in keeping up with it all! Very helpful.
--- In email@example.com, "Daryl" <darylcanada73@...> wrote:
> Mike, Did you find the Mamod site yet? Two links below will take you to pertinent threads about pop pop stuff and lots of info on burners of every kind in the Tech help thread section.
> --- In firstname.lastname@example.org, "mike.recycle" <mike.recycle@> wrote:
> > A great example of that would be Slater Harrison's anyone-can-make-it design with soda can alu, 2 drinking straws and ordinary 5-minute epoxy (and 5-minute epoxy probably has less heat resistance than slower epoxy). Until I watched his videos, I would not have believed this was possible. The drinks carton hulls are clever, too - good power/weight ratio and a "lively" character. Fast and loud!
> > Mike