[Øyvind Repvik] ... What about power needs? Has anyone who has overclocked his slug measured any change in power consumption? I ve done some measurements,Message 1 of 46 , Jun 30, 2005View Source[Øyvind Repvik]
> Mathieu Monney wrote:What about power needs?
> > Ok thank you for the fast answer and do you know until which temperature
> > the slug can operate ?
> > Øyvind Repvik a écrit :
> >> Mathieu Monney wrote:
> >> > Oh yeah! Great news !
> >> > I will try it in some hours.. Do you know if it makes some problem on
> >> > the slug like instability or more heating ?
> >> > Mathieu
> According to some spec sheet (Don't take this for gospel), the IXP42x
> can operate at 113 degrees Celcius (!) within the case.
> I think we have a slight margin ;-)
Has anyone who has overclocked his slug measured any change in power
consumption? I've done some measurements, not overclocked and not
very accurately, and it seems to use 7W (including the power supply
itself). The supply will deliver only 10W (5V * 2A), so if
overclocking increases power consumptions significally, we're quickly
close to what the power supply will manage.
Steinar ; NIL DIFFICILE VOLENTI ; http://latinitas.org ; http://voksenlia.net
... friend or ... soldering ... and ... in ... Thanks Rod, that s good to know. I may end up doing something like Jason did with a snipper of some sort. TheMessage 46 of 46 , Jul 12, 2005View Source--- In email@example.com, Rod Whitby <list.yahoo@r...>
> On 7/12/05, Rob Lockhart <rlockhar@g...> wrote:friend or
> > I would suggest if you can't do this yourself, ask either a
> > someone at a nearby EE hardware lab. You can't use a bluntsoldering
> > iron tip to do this without risking possible damage to the padsand
> > corresponding traces.in
> Note that we had a choice between two resistors for this mod, and we
> chose the one which was safest to remove with a blunt instrument.
> There are no traces underneath or running parallel to the resistor
> question, so it would be pretty hard to damage something.Thanks Rod, that's good to know. I may end up doing something like
Jason did with a snipper of some sort.
The detailed tips from Jeff and Rob are inspiring though and much
appreciated. I'm going to open up my slug, take a look at the task,
and see if I'm up for a little desoldering.