You can use an rc.quota diversion script to turn off quota checking.
From: Adam Baker <slug@...
Date: Thursday, Dec 29, 2005 8:17 am
Subject: [nslu2-linux] Re: Strange problem with nlung 5.5
Zhihao Tang <tzh2231@...> writes:
After I unslung my slug to port 2, it worked fine for a while, however
I have a strange problem now. My config is: Slug with unslung 5.5,
only one 160GB drive attached to port 2.
When I try to reboot, the box will stuck with blinking red light, but
the network interface is up, thttpd is up with password "admin"
(instead of my own password), telnet is not up but I can enable telnet
through admin page.
Then I can telnet in, and root password is the one I set on the hard
drive. Samba is not up, ssh is not up, it appears most init tasks are
not ran at all. However when I manually run them, all services starts
Anyone had similar experience and know what is going on?
I regularly have that problem on my old slug (unslung 3.18) although in my case it fails after ssh starts but before some of the other services and the reason is logged in /var/log/messages. When dns-masq starts it tries to write to its lease file but quotacheck hasn't run so the disk hasn't remounted read/write. Everything else that expects to see a working DNS server on 127.0.0.1 then fails.
Yahoo! Groups Links