On Tuesday 06 March 2007 08:21, twistedsam wrote:
> I recently bought the SNLU2, and a twin external hardrive console
> from sharkoon.
> I installed 2 hardrives in the console, 1 - 400GB & 1 -120GB
> So the console is connected with 1 usb cable to the SNLU2.
> It had the firmware : NSLU2_V23R72
> All was good, both hardrives are detected and formated with SNLU2.
> Now i did a firmware update, installed this one : Unslung 6.8 Beta.
> Firmware update went all good.
> Now only 1 hardrive is recognized, the 400GB (master)
> if i disable the 400GB and restart the SNLU2 it recognize the 120GB
> I reconnect both hd's, and only the master 400GB is recognized, there
> is nothing to see from the 120GB hardrive.
> I've try to install the firmware again, but always get error saying
> that the file name is incorrect, even if i update to an older version.
> But the firmaware update went well wen i did it in the beginning.
> I also try to conect to the port 1 or port 2, both same problem.
> What can i do to get my both hd's to be recognized. ?
> Thx, Sammy
I'm surprised that the stock firmware detected both drives on the one usb
port. I didn't think it was capable of that. I went to OpenSlug almost
Details on flashing the unit are at the wiki: