I know the military deuce and a half uses Rockwell axles. I googled that and found the timkin bearing model. From that, I searched Ebay and was referred toMessage 1 of 52 , Jul 31View Source
I know the military "deuce and a half" uses Rockwell axles. I googled that and found the timkin bearing model. From that, I searched Ebay and was referred to some Timkin 567 and 563 bearings and races that are 2.875" bore and 5" outside diameter.
Just keep following a search like that and you will probably be able to find bearings as big or small as you would like. These say they fit some Peterbuilts. Search on Peterbuilt roller bearing and you will probably find some common larger bearings.
----- Original Message -----
From: David G. LeVine <dlevine@...>
Sent: Wed, 31 Jul 2013 02:14:44 -0400 (EDT)
Subject: Re: [multimachine] Re: New spindle drawing needed/car expert needed
On 07/30/2013 04:52 PM, Pat Delany wrote:
> wish i knew to figure out what sizes of bearings are used for the rear
> wheels of front wheel drive cars
Ask and ye shall receive! Go to ANY good auto parts store and give them
the make and model and they will tell you, or online, RockAuto seems to
have a good GUI to make it easy.
Unfortunately, I haven't found a really "big rig" version yet.
"A word to the wise ain't necessary - it's the stupid ones that need the
I agree also! Homebuilt tools are for those who have no money but do have access to scrap. Other people should look for used tools but should realize thatMessage 52 of 52 , Aug 8View SourceI agree also!Homebuilt tools are for those who have no money but do have access to scrap. Other people should look for used tools but should realize that totally accurate rebuilds are very difficult.Don't let rust scare you off unless the machine was totally worn out before it was put out to pasture.Pat
From: David Lee <dsleei@...>
Sent: Thursday, August 8, 2013 2:15 PM
Subject: RE: [multimachine] Basic functioning mill/drill
Excellent advice.DSLeeBoth options have pros and cons,much of the success will depend on the details.IMO:1- buy an old american cast iron 9 or 10" latheand rebuild it. Works great, but not for slotting,even with the "milling" attachment. Est cost $500-900< forget the HF lathe, poor quality for more thanmodel maker sized projects>.2- Buy an old american made cast iron horizontal mill andrebuild it. Est $500-700. Works great for slotting and drilling,lathe work is very limited in size due to the table size / movement.3- Buy one of each. Est $1000. Excellent idea. Con[ space needed.4a- Build a smaller scale multimachine using a motorcycle or lawnmowerengine. Est $200-500 depended on your "junkpile".Pro, cheaper, make it to the size you need / have.Con: time to build, may not look "pretty".4b- look in the photo files for the home-built mill project.Uses a concrete frame and head. Smallish.5- Build a multi axis lathe ala the Concrete lathe with anoverhead arm for the 3rd axis. Con: more complicated build,more $$, more space.Pro: more versatile, more flexible use, greater "cool" factor.lance+++++On Aug 8, 2013, at 12:07 PM, Alan Nauman wrote:
Should I just purchase a lower cost s mall drill/mill/lathe and fight the size limits that come with it or is it reasonable for me to build a Multimachine that would perform limited functions that are not super accurate at a low cost?