> 5) DEC - No work done other than take a peek at everything.
I was in the other room, you guys were hogging the two tables.
To check in, I tried getting two systems up and running, a
VT100 (piece of cake, it even had the config label under the keyboard) and a
VaxStation 3100. The VS needs a display screen or at least custom cable to
VGA. It is possible that the motherboard could be jumpered to boot over
RS232 (via 'DECconnect') and I took some notes for that.
We have surprisingly few DEC terminals in the VT200+ class. Actually none I
think. There are 1 or two VR201 screens which should not be confused with a
VT220. Also just 1 or two LK201 keyboards, and one that was a custom (LK250
or somesuch) that would only work in one place. There are a number of
MicroVAX II's in the BA23 (deskside) cases that need a custom cable to
communicate over RS232, and I couldn't find one of those. Will have to
bring something next time. FYI, an "H8571-B" adaptor is the perfect one for
It has been suggested that Grabbe DEC systems not migrate out of a special
area reserved for them, or at least we would have to label them as being
from there before use.
The PDP-11's are getting a bit dirty so the next time somebody sees them,
bring Q-tips, paper towel and cleaner.
and No PDP-8 yet found <g>.
Had lots of fun,