"across_europe" <across_europe@...> wrote:
> Hello all,
> I appreciate any help that you may be able to provide ahead of time.
> I am working on preserving and converting some 8" IBM diskettes
> (part # 2305830, Record lenght 128 bytes) to a modern format. I am
> new to this and would really appriciate any ideas on where to start.
> I live in Sacramento, CA and am hoping someone knows of a reliable
> source for a old drive that can read these disks. I dont currently
> know what system the data was written in. Also, could someone point
> me in the direction of the best way to convert this data to some
> optical media. Thanks for everything - G. Parisi
The short answer is that most likely, you'll have to pay a commercial
company to do this for you, if they can. You've provided so little
information that anyone who COULD help you from their own, personal or
hobbyist resources, would not know enough to offer to do so. More
information equals more help.
Jim Scheef mentioned the basic issues. To get help, you have to
identify the SPECIFIC COMPUTER system these came from; and what
operating system it was running. You might need even more information
about that prior system, including what software and hardware was used
to write those files. Any information you have at all will be helpful:
as it stands now with what you've said, you are in a very difficult
situation, which would require an experienced technician with access
to 8-inch drives and old-school experience to resolve for you.
In any event, buying an 8-inch drive will do you no good, most likely.
There is currently no simple, plug-in-and-go, hardware and software
system you can plug into a Windows PC to either connect to an 8-inch
floppy, or to read whatever is on that floppy. (The 8-inch floppy
drive won't "plug in" into your Windows PC.) There are some partial
solutions, which informed technical people can use to make it work.
Bottom line: 1) You'd have to get "lucky" to find a technical person
who has this capability AND who would help you for modest cost. 2)
Otherwise, as Jim says, there are commercial companies which do this
for rather expensive fees (if your interest is only personal). In
either case, the more information you can gather about the history of
these disks, the better for you.
I've been selling 8-inch floppy drives, and documentation on them, for
decades. I see this question all the time. Check my Web site for some
discussion and some Web links. But mostly those links are for
technically oriented people.
My Web site is under some revision, so this information is rather
spread out. I'll fix that but not today. Thanks for your question!
Herbert R. Johnson, New Jersey USA
> web site</a>
> domain mirror</a>
my email address: hjohnson AAT retrotechnology DOTT com
if no reply, try in a few days: herbjohnson ATT comcast DOTT net
"Herb's Stuff": old Mac, SGI, 8-inch floppy drives
S-100 IMSAI Altair computers, docs, by "Dr. S-100"