What is the sound card or on-board sound component that you are using? I'm
not familiar with the Signalink or whether it has an inboard sound
card. Are you in 3 KHz radio mode, running Omnirig to control your radio?
If you have had problems since day one, I would suspect your sound card's
drivers. You might try the MME driver (on the Audio tab under
View|Settings and see if it's any happier. It is also quite possible to
have conflicts between Skimmer and other sound card apps that you may have
running. For example, my sound card will not play back .wav files -
including online streaming audio - while Skimmer is feeding its Line In port.
73, Pete N4ZR
At 01:47 PM 3/31/2008, james.sawle wrote:
>I am having a great deal of hassle trying to get the software working
>with my Radio, it use to, but since I have upgraded to 1.1 it will not
>play at all.
>I should also say that the software was if'ie anyway with me, as it
>use to work for say 30 minutes and then the same problem that I have
>The Problem is this, now when trying to start up CW Skimmer I get the
>main window appear, but when I select the first icon on the left hand
>side of the main window to start the waterfall up, I get following
>Dialogue box appear:
>'The specified format is not supported or cannot be translated'
>And thus I cannot use the software, any ideas????
>My Radio is the Icom IC-775DSP
>My Interface is the SignaLink USB
>My PC is a P4 with 4Gb of RAM running XP SP2
>Yahoo! Groups Links