You can try and use your RX-320 receiver with CW Skimmer in the SoftRock-IF
mode. You will have two copies of the spectrum on the waterfall because the
output from the radio is not quadrature (I/Q), but you can use the upper
half of the spectrum and have the whole 12 kHz segment displayed.
73 Alex VE3NEA
----- Original Message -----
I've been playing with CW Skimmer and the 3Khz audio setting. It
occurred to me that my Ten-Tec RX-320D has a 12 kHz IF output that
would give me some more bandwidth. From reading a few posts here I
gather this won't work without Alex or someone doing some programming,
so let me just add this to the wish list.