Firstly, you need to confirm that radio has a remote control port,
RS232, CAT, C-IV or whatever. Being Icom, I guess C-IV ?
You next need to get it able to take and act on commands from your PC,
if as I suspect (I couldnt confirm from a quick web search) it uses
Icom's C-IV system, you will need a simple hardware interface. Designs
are plenty on the web, just Google for "CIV RS232" for example, and pick
one you like, then build or buy it. Building them is simple stuff,
nothing complicated, and can be done for pocket money. The box to put
it in will often be the most expensive single part.
When you have it able to take commands from the PC, and respond back,
you have confirmed it is communicating with the PC OK.
You then need to either find someone who has made an Omnirig file for
that radio, or you will need to make one yourself.
All the information as to how Omnirig uses the .ini files is well
documented, but it has to be said, it can strain the brain cell of many
the first time you look! Stick with it, it's fairly simple when you
get your head round the methods used...
You will also need the manual for the radio, and the pages that describe
the Icom protocol and that rig's implementation of it. With all that
informaion, and some time, you could make your own specific .ini file
for that radio.
You could (should) also check the other Icom files that exist at the
moment, and see if any are for "similar" radios of the same generation.
You might find one that with a little modification might work with the
275. If nothing else, they can be a good hint as to how to do it.
Also, some sort of serial port monitor can be very useful when
developing such .ini files. Get Eterlogic's "VSPE" tool.
It's good for all sorts of things, but is also very good for making
"soft" serial "Y" cables, so you can have the Radio, Omnirig, and
Hyperterminal all talking to each other, so you can see what is going
in/out of the PC and Radio, to make sure the right thing is happening.
Unless someone else has come up with a ready made ic275h.ini file for
you, I suspect you will need to develop your own file as hinted at
above. Stick with it, Omnirig is a good system, and will allow you to
do many things with your radio and other software, that can make things
much more interesting for you.
> -----Original Message-----
> 2. ic275h Rig Description File
> From: robertodileo
> i have the ic275h how i can controll it with omnirig?
> i see that this model is not supported.
> can u help me?