Date: Tue, 4 Oct 2005 14:20:15 -0700
From: Meredith Arnold <marnold@...
Subject: Re: pasta amchine printing
FYI - there are two ways to print using a pasta machine!
One is as described by Alice using polymer clay to make the printing
Some more specifics on that: Bake the polymer clay in a craft dedicated
oven using an oven thermometer (for safety sake) at approx. 265-275 degrees
for 30 minutes per 1/4" thickness or follow the manufacturer's instruction
for baking. Baking higher than 300 degrees with most brands of polymer clay
will result in creating terribly toxic fumes that you do not want to
The second way is to use the pasta machine as a printing press for
monoprinting, etc. This process entails inking or painting a carrier surface
then sandwiching face to face with the surface to be printed. For example,
applying paint or slow drying ink onto glossy cardstock or acetate film and
then sandwiching that to a piece of paper (all cut to size to run thru the
pasta machine), add some string in between the layers if you want, and then
running the sandwich through the pasta machine. Peel the layers apart and
you have a print. There are lots of variations on this theme including using
resists like thermally activated embossing powders on the carrier sheet or
the piece to be printed to create patterns before inking or after the first
color has been run and then applying a second color, etc.
Comedian Artist, Instructor and Designer
110 N. 201 St.
Shoreline, WA 98133-3012
Edmonds Community College Arts Now Instructor/Delegate to China for Sept.
Artist Representative for Polyform Products (www.sculpey.com), a polymer
Advisor to the Board, N.W. Polymer Clay Guild
Certified PMC instructor, certified by Rio Grande Jewelry Supply, New Mexico
and PMC Connection, Texas
N.W. Polymer Clay Guild, (www.nwpcg.org)
Precious Metal Clay Guild, (www.pmclay.com)
Seattle Center Book Arts Club
> Date: Sun, 2 Oct 2005 12:23:43 EDT
> From: Alice Simpson <DanceMarathon1@...>
> Subject: Printing with Pasta Maker
> This summer, while visiting Gloria Helfgott's Pacific Palisades, CA
> she showed me this technique. We spent a laugh-filled afternoon pushing
> clay (aka Fimo) through a pasta machine!
> As I recall:
> 1. Flatten a ball of polymer clay and run through pasta machine several
> until approximately 1/8 inch flat;
> 2. Cut into desired shape, then inscribe image;
> 3. Bake in an old toaster oven for a few minutes (used only for art
> please). Watch that it doesn't burn;
> 4. Cool;
> 5. Do NOT eat;
> 6. Ink plate;
> 7. Place wet paper atop inked plate and print on press.
> Always looking for something good to eat, I was eager to eat the printing
> plates, which closely resembled a cookie, but Gloria wouldn't permit it.
> Gloria's an expert at this technique.
> I will stick to baking pies.
[Non-text portions of this message have been removed]