... From: Fritz Funk To: Sent: Monday, February 28, 2000 12:09 PM Subject: [bolger] Primers for latex Paints? ... I m
Message 1 of 8
, Feb 29, 2000
----- Original Message -----
From: Fritz Funk <fritzf@...>
Sent: Monday, February 28, 2000 12:09 PM
Subject: [bolger] Primers for latex Paints?
> What primer works best for the latex exterior house paints that Bolger
> and others seem to favor for instant boats? (To be applied over a
> partially-epoxied suface)
I'm not sure what you mean by a "partially-epoxied surface" but I used flat
latex house paint on a plywood catamaran that was well coated with WEST and
used no primer. This was only above the waterline since the boat was
continuously in the water. Just sand well and paint. The 8 years I had the
boat, in saltwater, the paint adhered and held up fine. It would, however
wear away in spots that had a lot of abrasion, as where fenders or dinghies
rubbed against it. But it was very easy to touch up or repaint. Just wash
with freshwater, dry, and paint.
Your message has been successfully submitted and would be delivered to recipients shortly.
Changes have not been saved
Press OK to abandon changes or Cancel to continue editing
Your browser is not supported
Kindly note that Groups does not support 7.0 or earlier versions of Internet Explorer.
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox. If you are using IE 9 or later, make sure you turn off Compatibility View.