I believe it was Message #83624 of 83669 I ve had my atlas th42 for a couple yrs now but bought me a rockwell 11x36 qc gearbox so need to sell atlas it s inMessage 1 of 33 , Jul 30View SourceI believe it was Message #83624 of 83669
"I've had my atlas th42 for a couple yrs now but bought me a rockwell 11x36 qc
gearbox so need to sell atlas it's in good shape has 5" buck chuck in limited
use shape craftsman 4 jaw chuck in rough shape steady ready Jacobs chuck lantern
post left and right holders Has the rare original atlas wooden cabinet with
atlas badge on it I'm in kansas what's it worth or what price should I put on
it?also has other gear set."
There were a few replies asking for additional information, photos, details etc. to help determine the value of the lathe.
Lots of folks here ready and willing to help. Just bit more clear info and communication is needed. We'll be glad to help, if you help us help you.
--- In firstname.lastname@example.org, anthrhodes@... wrote:
> I wondered what your question was so I clicked on the "All Messages (16)"
> link and went to the web site to look it up. There were 17 messages (1 added
> since the Digest came out). Your ID showed up once, your complaint to
> which I'm responding here. Either your original message never showed up or it's
> been deleted or your posting in somebody else's thread, so it's not
> possible to back track to determine what you wanted to know.
> You may have just posted your question at a bad time. People are usually
> pretty helpful here but remember, nobody owes you anything. Additionally,
> since I can't find your question I have no idea whether it was something with
> which people could help you.
> Hope it works out for you.
> Berkeley, Calif.
> In a message dated Tue Jul 30, 2013 4:51 am (PDT), rvessarjr writes:
> Hey guys wanted to say thanks for NOT answering my question
... Close enough! Really, if you had been reading this group, there is NO flaming, coarse language or personal attacks. Don t try splitting hairs, either.Message 33 of 33 , Jul 31View SourceRobert Vessar wrote:
>Close enough! Really, if you had been reading this group, there is
> Wel Jon if you could read better you would have read I never called
> any one anything I said the come across as.
NO flaming, coarse language or personal attacks. Don't try splitting
hairs, either. If you don't get the answer you were looking for, it
probably means you didn't ask the question precisely enough.
Lathe prices depend on location, and how you are selling it.
Private buyer, craigslist, eBay or whatever. In the rust belt
there is likely ONE Atlas, South Bend or Logan in a basement or
garage on almost ever block! In Hawaii, apparently, there is one
per city! That makes a HUGE difference in what people will pay.
So, it is REALLY hard to give a flat price, even without taking
the condition of the machine into consideration. Also, given
all that, a motivated buyer will pay way more than an occasional
tinkerer. If you look at eBay, you will see prices all over
the map on completed sales. (Auction listings are meaningless,
only look at the completed ones.)