Oh, sorry, my information was not correct. To enter KISS On ---- KISS ON and then RESTART ; To KISS Off ---- in TCP/IP, assuming the interface is ax0 ,Message 1 of 34 , Dec 14 2:21 AMView Source
Oh, sorry, my information was not correct.
To enter KISS On ---- "KISS ON" and then "RESTART";
To KISS Off ---- in TCP/IP, assuming the interface is "ax0", enter "param ax0 255" and then "Return". This command must be issue under TCP/IP "net>" prompt and in lower case.
So, is not easy to enter KISS Off. My MFJ is in KISS ON mode, permanently. I do'nt use programms in ax25 mode.
73's de CT1AKV
Em 2009.12.14 0:18, Lynn W. Deffenbaugh escreveu:
Francisco Guerra wrote:
> Commands for enter/exit KISS mode in MFJ-1278 TNC are: "KISS ON" and
> "RESTART" respectively.
So "KISS ON" puts it immediately into KISS mode? But once there, I
suspect it won't understand "RESTART" because it's looking for KISS packets?
I know the Alinco requires both "KISS ON" and "RESTART" to put it into
KISS mode. And a 3 character non-printable sequence (I don't have it
handy) to take it out. Is it possible the MFJ is similar?
> 73's CT1AKV
> (PS: Did you read the comments in my last msg?)
Yes, I thought I did. Ah, I see them now. I'll comment back on them on
a separate reply.
Lynn (D) - Finding it hard to fathom a KISS TNC understanding a word
command to leave KISS mode
> Em 2009.12.13 19:39, Lynn W. Deffenbaugh escreveu:
>> Francisco Guerra wrote:
>> > I'm trying both windows mobile and win32 versions. The first in a
>> > Samsung i900 device with Windows Mobile 6.1, and the other in
>> Windows XP.
>> > I like both of them very much. The wm version solves a problem when
>> > you have not a RF device or a digi ear you.
>> > It will be good to have RF acess too, and the possibility of igate in
>> > mobile or in fixed station.
>> Thanks for the comments and the platforms and the willingness to try
>> them both.
>> I just added the ability to transmit via a KISS TNC and now I realized
>> that I need to support a configurable path over which to transmit.
>> After that, I suspect I need to add configurable commands to tell the
>> TNC to enter/exit KISS mode for those TNCs that don't stick there across
>> power-ups (I know my Alinco TNC wants it). With that in place, it could
>> act as a receive-only IGate. Then I'll start tracking "local" "recent'
>> stations on the RF to enable a message-transmittin g IGate from -IS to
>> -RF (3rd party packets). Wow, seems like there's a lot to do, but I
>> really want to get a version out for those interested in playing with
>> the RF side of things too!
>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32 (and
>> soon RF)
... See Bob s APRS 1.1 extension called Destination Waypoints described at: http://wa8lmf.net/bruninga/APRS-docs/MOBILE.TXT This is part of the APRS 1.1 SpecMessage 34 of 34 , Jan 26, 2010View Sourcem6xsd wrote:
> Yep, point taken on 'Lost Fix' but I still think being able to selectSee Bob's APRS 1.1 extension called "Destination Waypoints" described at:
> pre-programmed static points when 'en-route' would be good, I can
> think of quite a few situations where I would like to 'annouce'(for
> want of a better word) that I'm not exactly where my GPS thinks I am
> (or was).
This is part of the APRS 1.1 Spec Addendum you can see at:
I'm considering supporting the ability to beacon a "destination
waypoint" as well as interpret them and draw the lines that are
described. I don't know how many other APRS clients do this, but it's
part of the published spec, so I might as well support it! Who knows, I
might even make it part of the Poll's () "slow beacon" mode!
Oh, and another preview of things to come is that I'm designing a
"coordinate picker" dialog that will embed the OpenStreetMap with pan
and zoom to allow you to home in on and set a coordinate. It'll still
support a variety of manually-entered coordinates, but you'll be able to
see where you entered or enter what you see. - Thoughts?
Lynn (D) - KJ4ERJ