Hello Tony, Thanks for the image. The problem may be related to the time source itself, which was one of the changes between V2.75 and V2.78. The olderFeb 7 1 of 31View SourceHello Tony,
Thanks for the image. The problem may be related to the time source itself, which was one of the changes between V2.75 and V2.78. The older versions retrieved data from a buffer (to feed the FFTs for the spectrogram) based on the number of samples, while the newer versions use the precise timestamps. If there's a gap in the timestamps, there's a gap in the spectrogram. This may be caused by the configurable 'time source', even though someone mentioned having tested all options but none of them cured it.
Anyway, if the soundcard's sampling rate is too far off, the timestamps (when based on the sampling clock) may be off too far after the program was running for some time. If the difference between the sample-based time, and the PC's system time exceeds a certain value the timing resets automatically (usually with an entry in the error log). I will try myself by deliberately entering a 'very wrong' sampling rate in the SR calibration table, and see what happens.
Am 07.02.2013 02:42, schrieb mux_folder2001:
Referring to file in folder "TonyC" called dropout.jpg:
I have uploaded a side by side of 2.78 and 2.75 listening to the same NDB. 2.78 shows a dropout at about the 44 Second tick mark while 2.75 does not. You can also see the timestamps pushed together. The beacon is TAD which isn't displaying too well because of the contrast being set too high.
Wolf, B27 with a chunk size of 100ms seems to work better for me than this new version. With the new one, if I switch on recording, the dropouts come back.Feb 10 31 of 31View SourceWolf,
B27 with a chunk size of 100ms seems to work better for me than this new version.
With the new one, if I switch on recording, the dropouts come back. Also, with recording on or off I get occasional clicking in the speaker. B27 with 100ms chunks seems to work well.
--- In SpectrumLabUsers@yahoogroups.com, wolf_dl4yhf wrote:
> Ok Tony, nice to hear that. I have uploaded a new "beta" ( .. i.e. most
> likely with a couple of bugs which are yet to be discovered .. ) to the
> website. This is V2.78 b29 at the moment, downloadable from
> (beware ... subject to frequent changes, because I use these 'betas'
> myself to install the program on different test PCs)
> Besides the modified audio buffer sizes (and soundcard I/O), I tried to
> make the background colour of the 'programmable buttons' on the left
> side of the main window also 'programmable' through the interpreter.
> Details at
> Wolf .
> Am 10.02.2013 19:39, schrieb mux_folder2001:
> > Dropping the chunk size to 100ms seems to do it. Thanks!
> > I could have sworn I tried this and had a bad result but perhaps
> > something else was amiss at the time. Thanks again for the help.
> > Tony