360 PAN IS VERY USEFUL in navigation ,main reason can tell if a object is in back of the robot or on the sidesMessage 1 of 13 , Aug 20View Source360 PAN IS VERY USEFUL in navigation ,main reason can tell if a object is in back of the robot or on the sides
--- In SeattleRobotics@yahoogroups.com, "jgkjcasey" <jgkjcasey@...> wrote:
> --- In SeattleRobotics@yahoogroups.com, "jamericanfreddy" <jamericanfreddy@> wrote:
> > USING a laser line and camera is a old design
> > KINECT camera uses the same design only little higher accuracy
> > Over 2 years ago i made the laser line/camera design and it
> > kinda work ok
> > KINECT and laser line design has 4 major drawbacks
> > 1 is large size
> > 2 high current 12 volts at 1.2 amps and 430 ma at 5 volts
> > 3 is both take a lot of video resources and memory
> > 4 not omni-directional 360 pan
> Human vision is not omni-directional either and that
> would be a great advantage in driving a car. It would
> much easier to decide what to do next while driving
> if you could view it all from above as in video games.
> > LIDAR LASER design has the highest accuracy and very
> > low current at 5 volt usb about 400 ma and is
> > omni-directional 360 pan plus small size.
> And combined with radar will probably make the driverless
> car a reality. It may even become illegal to drive the
> car yourself for safety reasons.
> Essentially these systems bypass the logic that would
> be required for human like visual data to determine
> the distance of objects (surfaces).
> As I don't have a LIDAR handy I will have to do
> without one for the time being.
> My current challenge is to change how I attach the
> Roomba motors (the base is pulling to the left) and
> find a suitable h-bridge circuit using the MOSFETS
> I got on the weekend to replace the relay control
> F9540N P-CHANNEL
> IRF540 N-CHANNEL
... I notice Dave Shinsel s Loki now sports a KINECT which is apparently used instead of the web cams for locating objects. ... And what behaviors do you planMessage 1 of 13 , Aug 22View Source--- In SeattleRobotics@yahoogroups.com, "jamericanfreddy" wrote:
> KINECT is very cool i own 5 of them on using one on myI notice Dave Shinsel's Loki now sports a KINECT which
> ROOMBA robot and have another on a roomba ROS ROBOT
is apparently used instead of the web cams for locating
> ONE on my roomba design robot i am using ROBOREALMAnd what behaviors do you plan to implement with
> software not shore if i am using one on my WHITE
> BOX 914 PC BOT or might use one of my NEATO XV-11
your Roomba robot using RoboRealm? I am thinking
of giving RoboRealm another look even if I only
use it to access the webcams. I have been using
escapi.dll to experiment with visual programs.
I have to work within my limitations when it comes
to electronics and programming. Shinsel's robots for
example requires above hobby level programming
abilities "expect that you need good Visual Studio
understanding to get it working." I am limited to
low level programming languages such as Assembler,
BASIC and C.
I have dumped the attempt at using the Roomba motors
and am back working on the old robot base although
it is somewhat overpowered in the motor department.