I ve done the same thing too, the screws are better than glue. I did it on this PVC carpet walking bot, http://www.flickr.com/photos/96504930@N02/8849400667/.
Message 1 of 5
, May 28
I've done the same thing too, the screws are better than glue. I did it on this PVC carpet walking bot, http://www.flickr.com/photos/96504930@N02/8849400667/. You can see the screws if you look close.
From: Walter Martinez <wmartinz@...> To: SeattleRobotics@yahoogroups.com Sent: Monday, May 27, 2013 9:53 PM Subject: [SeattleRobotics]
Re: Latest robot progress
Looks great! I've done a few similar robots with PVC pipes and I found that I needed to put a small selfthreaded/selftapping screw at each side of each joint or the joints will come apart (pipes pull out of the fittings/couplers). Just an idea from what I've experienced.
Your message has been successfully submitted and would be delivered to recipients shortly.
Changes have not been saved
Press OK to abandon changes or Cancel to continue editing
Your browser is not supported
Kindly note that Groups does not support 7.0 or earlier versions of Internet Explorer.
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox. If you are using IE 9 or later, make sure you turn off Compatibility View.