On Fri 12-Oct-2012 at 00:49 -0000, climber24752 wrote:
>> On Thu 11-Oct-2012 at 21:54 -0000, climber24752 wrote:
>> > I just bought a new sony camera with a panorama sweep
>> > function.
>> Without seeing the pictures I'd guess that you need to set these
>> input panoramic images to 'cylindrical' and keep any 'normal' photos
>> as the default 'rectilinear'. Probably you also need to set the
>> 'angle of view' parameter for these panoramic images to 180° or
>> whatever is your best estimate.
>Thanks for the suggestion. I tried it and the best I could get it to do
>was show the photos disconnected. Not sure why it did that. Doing some
>optimizing just made things worse.
These images can be stitched, here is a quick test:
You basically have two cylindrical photos with angles of view of
189° and 206° and a 'normal' rectilinear photo. Hugin stitches it
fine, but you need to assign different 'lenses' to every image first,
the .pto project is here if you want to play with it:
Though I'm not very impressed with this 'sweep' function, there are
lots of nasty artefacts, especially along the bottom edge.