I got the 2 Ideesign QM'ts but unfortunally the base 3/8 female isn't
centered perfectly. 1,2 mm off.....
For the rest it's perfect ! and very strong
With a new productionrun it could/should be centered. ( so it can be used ON
a rotator like the Seitz)
Peter Emmerich from Germany wants to do that but a new productionrun has to
be around 200-300 units.
The old stock is perfect for under a small rotator like the Ninja !!
Got the Giottos MH-200 and it's fine on a Seitz
The 1/4 screw was somewhat short so I replaced that with a 1/4 threat +
So I found out when removing the 1/4 screw in the "normal upper part" a
femaile 3/8 came available.
So a MH-200 can be used (upside down) on any tripod with a 3/8 mail
connection, hey, and that's nice too.
View this message in context: http://www.nabble.com/Quick-Mount-tf4557199.html#a13477975
Sent from the PanoToolsNG mailing list archive at Nabble.com.