>I have a problem on the secondary leakage current
> I thought I put the tape (the black one) between a secondary winding and
> another to evid losses.
> I do not know what to invent, the output voltage is very high, this occurs
> only at certain frequencies (you hear the secondary frying)
> This is the last time he rewinds the secondaries takes about 4 hours to do
> a job well done. I'm using the scheme with amcc320 Naudin, and he proposed
> ) magnet wire, | tape) magnet wire I need to provide some paint to put
> between one layer and another?
> primaries are low voltage so I do not have the problem of losses
i have resolved: black tape 3,5 EU
Your message has been successfully submitted and would be delivered to recipients shortly.
Changes have not been saved
Press OK to abandon changes or Cancel to continue editing
Your browser is not supported
Kindly note that Groups does not support 7.0 or earlier versions of Internet Explorer.
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox. If you are using IE 9 or later, make sure you turn off Compatibility View.