OK thanks a lot, I am new to these Linkstations, I managed to get my
300gb drive to work OK using stock firmware. I never realised these
things are basically PC's in their own right
--- In LinkStation_General@yahoogroups.com
> take a look here:
> If you wanted to use the stock firmware you could just flash it with
> the stock firmware. If you wanted to try OpenLink or FreeLink you
> could flash one of those.
> --- In LinkStation_General@yahoogroups.com, "rob566023" <blobstrom@>
> > I bought a secondhand HD-H120LAN, it worked fine ut in the end wasn't
> > big enough, I tried to swap out the drives but as soon as did that it
> > wouldn't connect, I put the old drive back in all fine again, until
> > now. I get the power on light as normal and the link/act light but I
> > cannot see the LinkStation, either by connection to a router or direct
> > to a PC. It is the newer model with out the switch on the back for
> > crossover.
> > Is there away of reloading the Linux software on the drive or new
> > drive. Or have a killed it all.
> > By the way I run Windows XP. I have searched the net but all I find is
> > Linux forums
> > Thanks in advance