Hi John Thanks so much for the unproto addition. It seems to work well I will try it during the net tonight and see how it goes. Thank You Again Mike W8EHHMessage 1 of 22 , Jun 9, 2012View Source
Thanks so much for the unproto addition. It seems to work well I will try it during the net tonight and see how it goes.
Thank You Again
From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of John Wiseman
Sent: Friday, June 08, 2012 4:20 PM
Subject: RE: [BPQ32] re Unproto
The version of BPQ32 that has just been released (thanks Ron!) includes a
basic Unproto facility. To enter Unproto mode, enter the UNPROTO command at
the Node prompt. Parameters are Port, Dest, and optional Digi(s), for
UNPROTO 1 DEST DIGI1 DIGI2
Once in Unproto Mode, anything typed will be sent as an Unproto frame. To
exit Unproto mode, enter ctrl/Z.
With the current code, only what you send will appear in the terminal output
window. To see what others are sending, you must use the monitor window. To
make this a bit easier, an option to monitor only UI packets has been added
to the BPQ32 MDI Monitor window, and to BPQTerminal and BPQTermTCP.