Mike Reed wrote:
> That is what I used for my reference material...
> Mike - N7ZEF
> ----- Original Message -----
> *From:* Art Bertheaume <mailto:abertheaume@...>
> *To:* BPQ32@yahoogroups.com <mailto:BPQ32@yahoogroups.com>
> *Sent:* Sunday, October 28, 2007 7:07 PM
> *Subject:* Re: [BPQ32] Help, I'm lost here...
> Hi Mike,
> Jim Oberhofer, KN6PE, has put together an excellent set up guide
> for the combination of BPQ and F6FBB you are using at this link:
> Get your RF operations going first and then proceed on to telnet
> Jim is also the author of Outpost. More info on Outpost is at
> this link:
> http://www.outpostpm.org/ <http://www.outpostpm.org/>
> Art, N9ZZK
> */n7zef <n7zef@...>/* wrote:
> I am trying to setup a BBS here by using BBQ 4.08 and
> WinFbb7.00i on a
> PII laptop, 233 MMX, 96 meg Win'98! sp2.
> I can get the BPQ to work by itself, and all works well there.
> If I
> change the settings in WinFbb to "test mode" all works there.
> But if I
> go the whole route with all, the machine either locks up or
> gets the
> I have followed all the documentation I have found as far as
> this all up, and the suggested settings of using Win'98.
> My goal here is to have a packet BBS in the area that I can send/
> receive packet messages via telenet for others in the area.
> Any Suggestions anyone?
> Mike - N7ZEF
If you send me your AUTOEXEC.BAT, CONFIG.SYS and BPQCFG.TXT
files, I will have a look and see where the problem is, also the
Regards ..... Peter ZL2BAU