the remote site is win ME with a wireless card to the internet
this will provide access to my DX-Spider, via AX25
a KPC-9612 wich we use both 1200/9600 ports
so a AX25 user can connect to the BPQ switch and type
c nn1d and connect to the spider
i am in a low area and cannot provide AX25 very well..
my home station (Spider) is using Linux connected to the internet
and will except connections on any TCP port i assign, normally
im hoping that this will work, im ok with providing others a
connection VIA netrom to their clusters or BBS
i can send a current config file, that i have, that is working well
with the TNC on both A and B ports but when a connection is trying
to be made to the spider, BPQ reports to the user on the switch
Sorry all ports busy try again later
--- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
> Can you send me simple diagrams of the setup at your remote site and
> dxcluster site?
> John G8BPQ
> -----Original Message-----
> From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com]On Behalf
> Sent: Saturday, February 04, 2006 03:54
> To: BPQ32@yahoogroups.com
> Subject: [BPQ32] New To Group
> im new to the group,
> i have a couple of question using BPQ32 remotly to a DX-Cluster..
> i have it installed and running remotely and connection is to the
> should i add my cluster in the bpqaxip nodes list, if so?
> my cluster uses port 7300 for the telnet login, i should replace the
> 10093 with 7300?
> Yahoo! Groups Links