The best way to identify it is to get the engine model. ... From: "jimybud" <no_reply@yahoogroups.com> To: <yanmartractorownersgroup@yahoogroups.com> Sent:...
Hi, I have a YM 169D. I let my tractor sit a while without using it and now the clutch wont disengage the engine from the transmission. Any suggestions? John...
Moisture has helped the clutch disk rust to the fly wheel. To prevent this condition, block the clutch pedal down when the tractor is not in use for an ...
I agree, Start it in gear and get it moving good. Then hit the brakes hard with the a clutch pedal depressed. This should brake the clutch free....keith ...
Good idea...If its the same as my FX28D there is a little spring loaded lever that will hold the pedal down to save your foot getting tired. I much prefer this...
I have a very nice YanmarYM1500 for sale in East Tennessee. It has only 48 hours on it since it was refurbished. I bought it to do some bushogging but I...
I have a YM 146 with a YCM 48 center mount rotary mower. The spindles are shot. I have looked at the local farm supply store and looked through their catalog,...
... Located where? Valve body? on the pump? I'm not much of a mechanic, but it would be a whole lot easier for me to remove a part that's easy to get to and...
have a 1500 yanmar zen-noh 2cyl. diesel tractor, works great pulling a 5 foot brush hog after about 30 to 45 minutes starts to spudder trys to die. will stop...
We had a similar problem last year. Try to cut a notch with file into the filler that the cap goes on. Sounds like you are getting a vacuum in the fuel tank....
Probably in the control valve. ... From: "copcyclerider" <copcycle@...> To: <yanmartractorownersgroup@yahoogroups.com> Sent: Wednesday, June 06, 2007...
i had this problem when i first got my 1500. i was running the pto in 3rd gear when it should always be run in 1st gear to achieve 540 rpm. so the pto gear...
Its probably a fuel blockage or air is not getting into the tank...I.e the vent is blocked...Wne it strts to sputter...crack the fuel cap and see if you get a...
... the ... the fuel ... this woul already have been done at mfg. seems like a lot of the same problems every one is having. thanks for all your help. ... ...
I've attached a post that has to do with the 3-pt hydraulics on my YM2210BD. I was also pretty nervous about taking the hydraulics apart, since I had never...
regarding fuel starvation---did you pull fuel line off after fuel tank to see if tank is plugged.I put a 800 dollar injection pump on a ford because a...
Hello all- My name it Kit. I live in Austin Texas and I am new to this group. I have recently become interested in building a custom diesel motorcycle. (I...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
