Does anyone have pictures of how they bonded and screwed the tabs on to the two halves of the spinner buckhead that they can post here? I'm getting close to...
Danny, the tabs are bonded on and screws go through them to mate the halves together. They are not in the way and do not present any problem. I had mine done...
Hi Danny, Here is the information I received from Greg Anderson some time ago when I was faced with the same situation. Hope the photo's attach..... Greg...
Listers, I must have missed something. I have a 200RV hung on my RV-8 still under construction. Prior to these recent postings, I hadn't heard anything...
Jim, The many, many discussions on this site over the last year concerning bulk head crackings is the problem that the tabs ended up fixing. It is a very easy...
I'm getting ready to fit my cowling and want to use a fixture for prop spacing instead of installing the prop at this time. I can borrow a fixture a friend...
I've goat a 200RV on order. I'm assuming that they come with the tabs already bonded in place now? Thanks, Guy ... concerning ... It ... They ... times, ... ...
Fellow Builders, I have uploaded two photo's of the backing plate installation for everyone onto the web site under 'WW200RV Backing Plate'. It should help...
Having removed a Hartzell from an RV-8 and installed a 200RV I can tell you they are virtually the same. Spacing is the same plus or minus 1/16" Randy Lervold ...
Thanks Randy, That info helps. Danny ... tell you they are virtually the same. Spacing is the same plus or minus 1/16" ... prop ... a ... spinner ... of you ...
Thanks Greg, Danny ... everyone onto the web site under 'WW200RV Backing Plate'. It should help explain the item and it's installation. ... on the process. ...
All- Just completed my annual and this was the first time that I didn't have to remove the prop and replace the bulkhead brackets due to cracks on my 200RV. I...
... I had lots of problems doing the same thing with a 7A. i wouldn't have bought a WW if I had known what i had in store to make up for the 3/4" difference....
Interesting. I changed from a std Hartzell to a WW200RV a couple years ago and had the same experience as Randy - it was very close to the same spacing. don ...
actually, a search back around 2005 might help. I tossed out the lower cowl and bought a new one and cut the aft edge. Walter tondu tossed out/changed out one...
Hello :-) I am aware of a person who had a MT then moved to a WW ..... he had a new backing plate spun with a 'step/indent' that joggled the cowl - prop...
Has everyone fixed their problem with the AD on the 151 blades? We had our blades replaced with the -H steel ferrule blades and all had been well. Been...
I had mine updated to the -H blades, although it wasn't flying yet, and it is performing perfectly with 34 hours on it now. Once I did my first engine start I...
can't recall if they changed it. and how much and what is involved again? thx tried to sell my plane and it was an issue for the guy mildly interested in it....
IIRC it's 500 hrs. And it is not a full overhaul, rather an inspection. Best thing to do is call them, ask for either Bill Koleno or Greg Anderson. Contact...
At Oshkosh, they said there were going to raise it to 1000 hours soon. I hope they do, I'm at 300 now. No issues since the initial known minor problems. ...
OK, just to make sure we are all still out there enjoying the props, I will create a post. Who has the highest time on a 151? I have about 415 hours. Who has...
Only 70 on my 151-H but working just fine. You have 415, will you send it in for inspection at 500? Randy Lervold www.rv3works.com ... From: flyrod56 To:...
I have about 400 hrs on an old style151 but with all the updates, so basically, its a new prop as of about 100 hrs ago. Scott RV-8a ... From: Randy Lervold...
We have about 100 hours since we hade the setup converted to the 151H. Question - I notice that one blade has always had a little end play and the other 2 are...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
