I've got my RV 200 prop mounted on the ECI IO 360. While setting up my EMag/PMag my mechanic said he didn't feel the prop was indexed properly. The blades are...
Darwin, When I put the 200RV on my RV-8 I immediately noticed that it naturally stopped horizontally (9:00-3:00) as compared to the Hartzells which stop at ...
Is it possible to mount the 200RV at any other index stop? Given that the hub has indentations for the 4 'protruding' prop-bolt bushings, I don't see how this...
Hi Randy, Thanks for the reply. Mine's at 12 and 6 when at TDC. It would make sense that it would come to rest at 9 and 3. If you didn't have cause to check...
Same here. MIne is indexed vertically and it stops at the 9:00 - 3:00 position and I like that! Dan N742DA 66 hrs. ... naturally ... up my ... seen one...
We started the ECI IO360 last Friday. Everything worked great. The engine prop combination was extremely smooth. Also have the Emag/Pmag system that probably...
Where is everyone? I asume everyone who has had praoblems have had them fixed and all are happy. I put the extra spacer in my 200RV and it has been solid and...
Well, so far so good for me. I've got an extended hub 151 on an O- 360. I had minor grease splatter at about 50 hours, but that subsided and I have had...
I just flew my RV-8 for the first time, and the 151 is doling perfectly so far. 3.1 hours Marshall Jacobson RV-8 N68AK ... about ... requirements. ... had ...
I have an RV-8 with a 151prop. Iintially had an issue with a little grease and a loose hub but they are stranding behind their product. I have 75hours on it...
Hi Everyone, I've got the RV200 prop on an ECI IO360 with Emag/Pmag system in my RV- 7. The Gov is the Jihostroj. Very smooth performance. I have noticed that...
Darwin, please define "grab". Does the engine go past 2700 for example and then get brought back down by the governor, or are you feeling the prop naturally...
Darwin; It almost sounds like there is air getting in from the governor. I have
seen R-985's with Hartzell props do the same thing when the governor was...
When I apply power, I get the RPM rise then a rather pronounced acceleration. It is not a very smooth transition from power to acceleration. Don't know how...
Darwin, I've been flying my IO-360 WW-200RV RV-7 for two years now. My friend flys an RV-6 with IO-360 and Hartzell. His airplane is a lot older, but are...
I'm not expert, but if it doesn't feel right, it probably isn't. Best advice I can give is to have someone who's constant speed savvy fly with you to observe...
Darwin, This is probably not a factor, but I just thought I'd throw it out there. When I get to the runup area, before takeoff, as part of my runup, I always...
I have a hartzell on an RV4 and it always has the surge you describe on the takeoff roll. It was explained to me, that as the throttle is advanced initially...
Darwin- I joined this thread a little late, so my apologies. One other thing to think of is what the governor pressure is set to. Apparently how it comes from...
This is correct, if you did not buy the govenor from WW then it is set to a lessor pressure. Jonathan Weiswasser <jonweisw@...> wrote: Darwin- I joined...
Hello to all the other groupies. Looks like there hasn't been a whole lot of activity on this lately, with about 10 messages posted in January. I've had my...
Hi Ken. I've been flying an RV-8 with a ww151 since last summer. I've been very happy with the prop, although I had a couple of minor issues at first. My prop...
I have had good luck with the Titian group. Gus is very good at keeping up on the site and the props. I got my 200RV from the group in San Diego just before...
I'm nearing 40 hours on my 7 with the RV200 prop. Everything is extremely smooth and I'm going to have the prop dynamically balanced soon. For those that have...
Interesting. At the end of the first run-up inspection instructions in the manual that came with my 200RV a couple of weeks ago it says "The engine/propeller...
... balancing ... Hi Randy, Thanks for the information. I believe our guy has the computer version. He said he has done a couple of WW props and they are...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
