... seals ... For bearings, seals and Gates belts I use Bearing Distributors in Columbia, SC. They have a web site. "www.bearingdistributors.com" Also an...
Hi Mike,, I also am interested in the chrome pipes,,,,send pics please. Frank ... From: mikewilliams68 To: wheelhorsegardentractors@yahoogroups.com Sent:...
Does the c160 with the 16 hp kohler have the old "starter/generator"? If not approximately when did they start using the current style starters? Is the...
... Kevin , Wheel Horse / Kohler started to use a regular electric starter motor and alternating current charging system in 1973 . A Wheel Horse with a the...
... Bill, To my understanding there is no feature tractor for the 2003 show. Would it be to late to try and get the 953 and other early "Large frames" as the...
Kenton, there is no specific model featured but I believe the year 1963 was decided to be featured. So any model from 1963 would be considered the featured...
Mike, Me too, please Fanocool@... Thanks ... _________________________________________________________________ Add photos to your e-mail with MSN 8....
The 8 hp Kohler engine on this C-85 I am working on seems to spin slower than my 12 and 16 hp Kohler K series engines do, and they are a little slower than my...
... are ... battery ... slower ... Rick, My 701 has a 7 h.p. electric start and it turns over real slow also on a new battery.I would say as long it does'nt...
I'm rebuilding the wheels on my tractor and the parts manual is a little confusing.Does any one know what,and the number of washers and/or Shims that are...
... 11BX02. ... Hi Bob, The Toro Master Parts Viewer shows the part# 920256"washer" and 5210 "washer shim" as being what you need.Go to Toro.com and look for...
I can't give you the part numbers but the "rule-of-thumb" is the real thin, (.015) goes first, (against the spindle), then the wheel, then the medium, (.050)...
Hello Mark Thanks for the reply. According to the manual there is (2) washers 3/4 first(next to the spindle),then (2)flange bushings (with the wheel in between...
Kenton , I will getting in tuch with Harvey (my953) up in Maryland for some pictures of his nice restored 953 to be used on the dash plaques for the 2003 5th...
FARMERIK , The Kohler engine (K-181) in your C-85 does have a compression release . The flywheel is a differant diameter from the Kohler 12 and 16 hp engine so...
... and ... of the battery tray ,I borrowed from my 500 special. I had no idea the 500 special was a rare tractor when I modified it with running boards,rear...
I have a K341S and a K301S for sale. The K301S was on a Ariens, and was running when I removed it. The K341S was on a Wheel Horse, and I cleaned it and...
I am not familiar with wheel horse tractors. I have a B-80 that has a press on sticker (factory) that states it is a model b-80 and below that it says...
Bill: I know Dale Riniker took several pictures of my 953 at last year's show, but I can easily provide you with more. Since last year's show, I have found a...
Clint: I also have a B-80 4 speed. Yes, 3 forward and 1 reverse is what they meant by '4 speed'. It probably has the original transaxle in it if this sounds...
From 1985 to 1992 the 300-8/400-8 series 14/16/17/18/20hp and 1991/92 312-8 and 314-8 tractors used the 110995 transmission. From 1985 to 1990 the 300-8 series...
Hello Is there a list of WH tractors that came with a 12hp in them anywhere.Or does anyone know what WH tractors came with the 12hp engine? Any help would be...
... Bob The info. you gave K-301A 4763B D020766 or D02076C is a 1968 12 HP with a special oil pan. It is not listed in any Wheel Horse applications. It is not...
... Joe 185 Toro/Wheel Horse tractors models are equipped with a 12 HP K-301 engine. Example: Charger 12, Electro 12, Raider 12, C-120, C-125, 312 etc. If you...
Well, this is going to be a big list but I will start... 1276, 1257, 1267, 1277, Raider 12, Charger 12, Electro 12, 12hp 8-speed, C-120 8-speed and Auto, C-121...