Well, at this point anyway, I`m lost when it comes to interchanging the tips on my welding torch. I have an Oxweld model CW 300 cutting torch and want the use...
The end vertical parts of the frame are 1 1/2 square x 1/8 wall, the top/bot frame rail is 3/4x 1 1/2 rectangular x 1/8 and the pickets are 3/4 square x16 ga. ...
Hi, I've built a few decent size gates-11 TO 12FT each (with the pickets on the outside) and had to force the warpage out of them after they were done. I tried...
can a spool gun be adapted to run off an AC stick welder, or is there one specifically designed to do so? ive been looking but cant find an answer anywhere......
I was wondering if anybody has a Miller suitcase 12VS and if they have done any aluminum welding with it. I dont want to get a spool gun at this time and would...
I have the above unit and am fairly "new" to welding. I have run a 2# spool of flux core reg wire thru the unit and am not doing too bad with what I need to...
Does anyone have any experience with the Hobart Trek 180 welder. It is battery operated. Will recharge of 110v. Ken -- http://aws-washdc.org/ Change is...
My son took one semester of welding at a community technical school and works for a fabrication company as a helper. Things have slowed a bit and he really...
I was just watching Dirty Jobs a show I normally don`t watch, but I caught it while channel surfing what caught my eye was welding. The host of the show was...
I have a little 140 (120v) that I use on site for small jobs. No matter the speed or power, I get a "pulsing" feed into the weld, like the wire starts and...
I am new to this group. Would like to know if anyone has or knows where I can obtain information on an ACE Hot Spot Model E-1040, spot welder. It has Ace...
Hello to the group.. I have a question about an easy way to remove residule flux on a brazing weld. You can wire brush it (which I did) but doesn't get all of...
I have a small Lincoln 140, 110 20 amp welder. I would like to run it off of my truck with an inverter for small welds on site. Anybody do this? What size...
Hello gang, Name here is Mike. I'm in Tucson, AZ and have been a tinkerer/prototyper/inventor type all my life. I have a pretty well stocked machine shop that...
I'm new to the group and new to welding. I bought an Oxy Acetylene welder at a rummage sale. It's pretty old and has the small tanks - the acetylene tank is...
I am practicing horizontal welds with 5/32 6011 electrodes, and iam not sure what to set the arc/inductance control at ? I assume this is the same things as...
lincoln owners, what model would compair to millers Dynasty 200 DX ? I wanted a Dynasty mainly for the Auto-Line feature that connects to 120-460 VAC, single-...
Is it still possible to buy a Millermatic 140 for about $500 I have a old KARC 100 welder and been wanting something much newer(that welder is a 80's model I...
I have a Hobart Brothers TD-316 AC Arc Welder. This welder was sold to me by a friend who said that it came out of the newport news shipyard about the WWII...
Here's a direct link to my photos of waterheater tank stove construction pics. I've added more photos and descriptions of the different steps in the comments...
OK OK, I took a Mig class about 6 years ago. Earlier today after returning from a very long tour of duty in Iraq I applyed for a job, The only requirment is...
OK, I took a MIG class about 6 years ago. After a very long tour in Iraq Ive came home and am looking for a job. I have one come Monday , all I have to do is...
20/09/2009 21:26 90 degree angle jointed mild steel 4 mm plates, fillet welding from inside of the angle using a small (180 amp) single phase MIG. The fillets...
Does anyone know what it cost's for tanks for an oxy/acet set up I have a victor journeyman torch set and was curious, are the tanks rented or can you buy them...
Having problems with message search?
