Hi all, new here, i have a 2005 WJ rr, i fly at 4500 ft in moab most of the time, i run 32:1 redline and premium gas, black oil is coming out of my exhaust at...
Ron, I have the same WJ, and I run Red Line @ 40:1 it runs fine. Your plug might need to be hotter if it stays rich. Â Chris Antoskow ... From: ronbthomas...
Keep in mind when you do replace the crown gear on your new pully that those bolts should have been factory staked in place. That is, the crown gear should...
Todd, Thanks for the heads up, I had not noticed the punch marks before and yes loctite will be used. I am betting the starter was the problem, I think your...
Hi Todd, Factory staked?? Please excuse my ignorance. What is that? what does it do? Mario ... From: Todd Andrews To: walkerjetusa@yahoogroups.com Sent:...
Hi Ron, I have encountered the same problem, Chris is right about using a hotter plug, I ran 40:1 when I first got the motor and upon advice from one of our...
I need some advice... I have a Simonini Mini 2 Engine with a Wallbro 39 carb. I actually just replaced the carb and I am still having overheating problems...
The US importer for Simonini http://www.simoniniusa.com/ ... From: Murray Beebe To: walkerjetusa@yahoogroups.com Sent: Tuesday, September 02, 2008 12:56 PM ...
If you haven't yet read it Murray, have a look at Alex Varv's articles on pop-off pressure: http://footflyer.com/PPGBibleUpdates/Chapter12/carbs/carbs.htm ...
Murray, I had the same problem this spring. Although I couldn't find a leak, after putting a clear gas hose before the carburetor a lot of air bubbles were...
David, Wow... that's pretty cool. I never thought it could be that easy but you might be right. I am pulling my hair out here as well. My thoughts are the...
Thanks Todd! That's very interesting information. I do think that I have an excess amount of alchohol possibly in my fuel. I will try the av gas solution...
thanks for the input, burning the rest of my 32-1 fuel tonight then I think im gonna make the switch to 40-1 although after flying last night and today, the...
Damm good information! Chris Antoskow ... From: David Mangus <mangoflyer@...> To: walkerjetusa@yahoogroups.com Sent: Wednesday, September 3, 2008 1:16:21...
Guys... Just an FYI... I was having a HUGE problem recently with My Cylinder Head Temp gauge (mounted on the frame of my flat top) showing my CHT temps way out...
I just purchased a used WalkerJet to add to my squadron. It is three bladed, Simonini engined and I guess around 2002 or 2003 vintage (red and silver frame). I...
Replace the stock WB-32 carb with a WB-37 and the rough mid-range will go away. There are mods that can be done to the WB-32 to accomplish the same end result....
I have a 2006 W200 RR, and I have had a lot of problems with my exhaust system. After nearly losing a prop when I replaced the factory muffler with a...
I invite you to check this thread: http://paramotorclub.org/forum/viewtopic.php?t=2321 To point out which improved muffler you're referring to. @ about 10...
How about posting some photos. It sounds like a good idea. Did the muffler change the noise level? ... From: Gypsy In The Sky To: walkerjetusa@yahoogroups.com ...
I don't think there is any extra noise. The prop/BMC airfilter combo is louder anyway. Not a real pretty look but I got the muffler was free (and I don't spend...