I have all my repeaters stored in memory and have each one displaying the alpha text I programmed. Is there a way to swith to the frequency display on all...
... displaying ... frequency ... tells ... would ... channels ... and ... One solution that I use is to put my frequencies in by their last two digit after the...
First, my opinion for Tom, regarding Alpha/Freq switch... As I'm not a long-time owner of VX-150 and also not a long-time ham, my knowledge is very limited....
Razvan, ... You probably mean "decade" switches, to dial in the voltage. I'm thinking either thumbwheel switches or 10-position rotary knobs. ... Ouch! At...
[Users from yaesuvx-150 group, go to vx-150, which is an older and bigger group. These messages were sent to both.] Thank you for answering, Andrew, and for...
Can anyone help me through this: when reading the radio into the software in clone mode, the cloning keeps stopping at between 14 - 19% complete, the software...
What operating system is the PC? I program mine with an old Win98 machine, and it works fine. I do have problems programming a Yaesu FT-50R with WinXP -- got...
Has anyone here had a problem connecting a home made ground plane antenna to their VX-150 with a cable that has SO-239 on one end and SMA on the other?...
Yes, I'm running Win98 on that PC. George, What do you mean by reverse order? ... was done, it worked fine ... 14 - ... http://docs.yahoo.com/info/terms/...
There is some possibility that using an external antenna with the VX- 150 could contribute to the "blown final" problem this model seems to have, although...
When it comes to using whips with SMA connectors, I recommend using a sturdy SMA-BNC adapter (like the Gulyas custom adapter), then using an antenna with a BNC...
I tried sending first, it didn't work. Moved to my newer computer running XP, it worked first time. Now, the only problem is that some of the memories are...
... I think that means the PLL is not in-lock, which can happen if you have opened your unit up to work on non-ham frequencies, but the desired frequency is so...
Andy, Thanks! It seems that you're right. It will only go down to 124.875MHz. This is after I did the CAP mod. All set now, thank you all! ... and ... have ...
Answering my own question, I rechecked the settings and it works properly. ... __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free,...
Hi, I use the memory mode on my vx-150 a lot. After awhile, whatever is in channel 2 drifts into channel 1 and if i store a station in channel 1 it becomes...
hi all, just got a new vx-150 last week and its working fine but im curious on how long to charge this h.t. i been charging it over night when i go to sleep...
8 to 12 hours should fully top it off. Final voltage will be just a little over 8V. -Kevin -KG4ZUD ... __________________________________ Do you Yahoo!? ...
I have a Motorola NAD 6502 antenna which I would like to use with a VX-150. Is there an adaptor that will connect the female SMA to this antenna? If so who...
If the antenna is a BNC, then this link may help. I understand that they are nice. I do not have one. I do have the Yaesu factory SMA-to-BNC connector, but...
I have that particular adaptor. The Motorola antenna has a screw in mount similar to the SMA, only larger threads. I'm experimenting with different antennas to...
I would like to know about options to power My radio other than the battery pack. Can I use the supplied "wall wart" to run the radio? Are there Cig. lighter...
Phil, Yes, there is definately a Cig. lighter cord for that radio. AES and Universal Radio Communications sell it. Out in the field, I use the Nomad 300...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
