There has been a lot of discussion about this BPT Valve on 94-95 models. Is this thing on a 1999 villager??? ... From: "Holt, Robert G." <rholt@...> ...
1879
Stanley Kwiek
ETC_Stanley_Kwiek@...
Dec 1, 2000 3:28 pm
Thanx to all, especially randi amd toni. I was able to locate the darn hose, and sure enough, it had a rotted slice all the way through. In the process of...
1880
KlownChuck@...
Dec 1, 2000 4:18 pm
Another win for the GOOD guys.. Yea Egroups.... Chuck...
1881
KlownChuck@...
Dec 1, 2000 4:18 pm
When I got my return copy of this email that I sent out..... it had an occasional <<< ’>>> in the email. I promise.... that is not ME swearing (like...
1882
Dave Hoffman
DHoffman@...
Dec 1, 2000 4:23 pm
SURE you weren't. You ’'s are all alike. ;-) Dave ... From: KlownChuck@... [mailto:KlownChuck@...] Sent: Friday, December 01, 2000 10:17 AM To:...
1883
rholt@...
Dec 1, 2000 4:30 pm
Is there some marking or some other identification to let one know when the bpt valve is found....
1884
S. Johnson
sjdenver@...
Dec 1, 2000 7:24 pm
I've located my hose and from what I can see, it looks to be in pretty good shape. You've that have found bad BPT hoses, did they look bad visually too? ...
1885
Randy & Toni
polaris@...
Dec 1, 2000 9:52 pm
When I replaced mine there were only two ends left, what was left was hard as a rock. I did not notice any loss in performance when it was bad, it just made...
1886
Stanley Kwiek
ETC_Stanley_Kwiek@...
Dec 2, 2000 12:40 am
Well friends, I got a free replacement from the auto parts store, and installed it, and started the van, and lo and behold, I STILL HAD THE DARN CEL ON!!! Boy...
1887
Tom DeWitt
tom@...
Dec 2, 2000 1:01 am
I don't know what you did ( since you don't tell us in your message ) but if you replaced the BPT hose, it took about 5 days for the computer to figure out...
1888
Tom DeWitt
tom@...
Dec 2, 2000 1:03 am
Has anyone had experience adding a Subwoofer to the Quest sound system? I have a '96 Quest GXE with the factory 6 CD sound system but no sub. TIA - Tom...
1889
wromine@...
Dec 2, 2000 2:37 am
Hi Chris, I have a thought. What I am suggesting I have not tried, but maybe someone else can confirm or denounce this approach. One problem with electronic...
1890
wromine@...
Dec 2, 2000 2:46 am
Hi Tom, I added a 6 CD player to my existing AM/FM/Tape Player in my 95 Quest. I kept the factor speakers. The back speakers provide the low range of the...
1891
Marco Veenis
veenis@...
Dec 2, 2000 2:57 am
... Was the hose gone? And, did you erase the stored codes after the repair? If you did not the light will continue to light up, even if you fixed the problem....
1892
Carl Haines
chaines@...
Dec 2, 2000 3:50 am
... Right on! Been there, suffered that on a different car which I still own and is running great now. As far as the temperature sensor goes, you may find...
1893
Chris Walther
cmwalther@...
Dec 2, 2000 4:08 am
Since the engine runs properly when it is cold I had eliminated it from the suspect list - but to be honest I am not that familiar with the system. Is there a...
1894
Jeffry Schmitz
jschmitz@...
Dec 2, 2000 4:15 am
Certainly; it is in many respects just a sealed version of what is behind the dash of the average radio volume knob. As many of us have had happen, the volume...
1895
Tom DeWitt
wizwitt@...
Dec 2, 2000 4:15 am
Thanks for the info. I have the service manual and I see that the 6 CD factory system has provisions for a rear subwoofer and amplifier in the back right of...
1896
Chris Walther
cmwalther@...
Dec 2, 2000 4:48 am
Thanks Carl. I'll try to clarify the engine operation. One thing I kind of glossed over is that while I didn't check the fuel pressure while driving down the...
1897
Marco Veenis
veenis@...
Dec 2, 2000 5:15 am
1898
Jeffry Schmitz
jschmitz@...
Dec 2, 2000 5:15 am
Here is a thought. In reading your first description of the problem, I realized I had almost the exact same symptoms on my 84 Saab ( 90K+) when towing a...
1899
Randy & Toni
polaris@...
Dec 2, 2000 3:49 pm
Ours went out after driving it about 400 miles. But as someone suggested I had not thought about resetting the CEL. Randy & Toni ... From: Stanley Kwiek To:...
1900
Jeffry Schmitz
jschmitz@...
Dec 2, 2000 5:06 pm
I'm going out on a limb here but I think that all the codes can be reset by disconnecting the battery for an extended time frame. Not sure what the time frame...
1901
R Wood
wood_r@...
Dec 2, 2000 8:48 pm
When I replaced my BPT hose the CEL never came back on. Now, mine was an intermittent CEL (in fact when I took it to an auto repair place to have them read...
1902
Marco Veenis
veenis@...
Dec 2, 2000 10:09 pm
... have indicates that this ... This is exactly what the Haynes manual says. The codes can be erased by disconnecting the battery, but the manual does not...
1903
Chris Walther
cmwalther@...
Dec 3, 2000 3:48 am
Here's an update on my Villager losing power after warmup. I had someone run the throttle while I checked the exhaust gasses. It didn't smell rich even...
1904
Chris Horvath
fchorvath@...
Dec 3, 2000 12:12 pm
Hi Group: I was wondering if anyone has had any experience or luck in rebuilding starter motors for a 93 Villager. Mine makes a terrible noise right after the...
1905
Jimb
jjsan@...
Dec 3, 2000 7:32 pm
Chris I recently replaced my starter had 124k on 95 Quest, Starter would intermittantly Grind. I check around localy, they were all $160 on up, Local Dealer...
1906
Stanley Kwiek
ETC_Stanley_Kwiek@...
Dec 4, 2000 6:12 pm
Well friends, If you remember, the last post i sent, said that i still had the CEL on after replacing the BPT hose. I was all set to reset the codes, but had...
1907
bill_hale@...
Dec 4, 2000 6:43 pm
I know you measure the fuel pressure and it responded to the vacuum feedforward. But did you measure it under power? A clogged fuel filter can cause the...
