Check the length from the base of the lug to the end of the sensor they are different for the 12v and the 24v. Intermotor sell them through Partco, Unipart,...
OK, I don't mind Radar. If you can get a new one for about the same price then I would think that's the way to go. Offer's still there, but I don't mind if...
Hi Terry If you are realy stuck you can do the following:- First get a sutible container to catch fuel then de-pressurise the system by depressing the pin on...
Terry, I'd suggest spraying WD40 around any suspect areas, but I thought you'd already gone down that route? I still say try changing the vacuum reservoir...
My pride & joy died on M1 today. Blew C H G north bound at Daventry Junction. It was ! a 3liter auto SENATOR 24v CDi,1983 black superchipped ,shiney beast...
You haven't told us what the mileage is Ray, but assuming you haven't 100K since the top end rebuild, if you've had the chains replaced and everything else is...
Thanks ian & dave for your encoraging replies, i don't have to tell you why i have such a love affair with my senny. I do actually have a second un , a j plate...
Hi all, My old alloys are for sale due to upgrading. They are BBS RX 16" x4. They are in excellent condition having been recently refurbished and looked the...
Thanks Darren. I must get some bits and try that. I will report back when I have done it. Terry Subject: Re: HOW DO I CONNECT A PRESSURE GAUGE TO THE FUEL...
Hi Roddy, thanks for the advice. No, I have not yet sprayed anything around posssible leaks. Ed Bullock advised me to contact Ian Marsh, he suggested sump...
We would like to remind you of this upcoming event. Search Past Posts Date: Friday, May 6, 2005 Time: All Day Just a reminder to all list members that past...
vauxhall_senator@yaho...
May 4, 2005 11:02 pm
13016
You're right terry, it does sound as though your reservoir's ok, but for the ten minutes it'd take to swap it out, I think it'd be worth it, also it'll give ...
hello ray, wot a bummer, all i can say is .. if its a car you know and luv then mend it.. its often cheaper and who knows what other probs there may be on what...
I did mine with Omega panels, but I wouldn't recommend this route if you don't have access to a very skilled tame panel beater. There seems to be a firm in...
Considering the amount of Senators left I cant see anyone making them, looks like will have to be a club supply thing with QUALITY as the ones I saw from...
I have a complete Burgundy 24v with a sweet engine sat on my drive waiting for me to have the time to replace the screen and MoT it. The engine is much sweeter...
http://www.autoblechteile.de/ As Ashley says they aren't that accurate a fit but it depends if you want a show car or a workable workhorse kept on the road....
I will be getting my repair panels (which I bought from Germany) welded and sprayed next week, so I'll let you know the results ASAP.....Roy ... From: "Radar"...
The ABS light comes on after about 15 seconds of running on my no.3 manual M reg 24 ex-police Senator. I have disconnected each front sensor in turn at the...
I don't know about your Senator problem, but I'm amazed you managed to narrow down your CX problem to a frayed wire...........Slough never managed to sort out...
I don't think you can do a diagnostic on the Senator ABS system it's down to checking with a multimeter, possible relay faults inside the black cover of the...
My ABS light is on. I have traced the fault to the offside rear ABS sensor gone open circuit. This is the sensor attached to the differential on a bracket. The...
I've got some kicking about Terry, I'm sure there's one good one out of the lot. I could send you them all down and you find one that works and send the rest...
Thanks Roddy. I assume they are all OK. You can check with a multimeter. Push the probes into the two sockets and it should carry a current. My dead one does...
hi all,just thought i'd update my last messages regarding suspected chg blown.the lowest quote for the job i could find was £700. I decided to have it done,&...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
