WD4LSS and I installed a mountain top APRS WX station at my 6M repeater site. The Tracker2 is sending WX and status packets as expected. When the WX packet is...
Glad to hear it. 21 of the ADS-WS1 v1.1 boards came in today. Got two built, minus the terminal blocks and humidity sensors that I don't have on hand. Some...
I tried asking you off list but the email bounced. What sensors (wind speed, direction, rain) will be available for it? Are you going to start a new separate...
Hello, Thank you to all who replied and for all the suggestions! Yes, Static Navigation is a feature built-in in SiRF III-based GPSs and I used SiRFDemo to set...
... From: "Jon" <c0j_1999@...> To: <tracker2@yahoogroups.com> ... I'm told miracles hapen at Christmas Mine are made to happen................... by ME...
I modified the Tracker2 configuration but I'm still getting what appear to be position packets. I might be mistaken. My APRS Elmer is in Canada on business and...
When I originally read your post I was thinking unit sensitivity of the BR-355 compared to Garmin pucks. I had remembered reading the sensitivity of the BR-355...
I probably will start a group. What email did you send to that bounced, and what message did it bounce with? It has wind speed, direction, and rain sensors on...
I did a quick search, but did not find a thread concerning the correct settings. I'm sure it's been discussed before. I have a VX8r that I'm going to carry...
The position is correct. What I want to do is eliminate the position packet to recover the wasted bandwidth. The station position is already being broadcast...
Andrew KC2EUS wrote... ... With DIGI ON in the T2, it should digipeat via the call in the T2. To use it that way, you could use a path like GM1YMI,WIDE2-1...
Thanks Keith for the reply ... This begs another question. If I enable as WIDE 2-1 or WIDE 1-1 then it'll digi everything it hears, as long as they fit the...
... What about the wasted bandwidth from the status packet? ... That's an awful lot of wasted bandwidth, far more than what you're concerned with... ...
... The command is "SETPOWER";, but other than that it looks good. Consistent with what I get, at least in general shape. I'd like to run several curves at...
It's not possible at the moment, but I have it on my list. It also needs to be able to transmit with a different SSID for the position and weather station...
... If you really need to know the weather ever 5 ... You have some good points. Obtaining near real time wind speed reports from the repeater site is the...
Hi Fujira, Patrick, How did you resolve the PHG issue on aprs.fi? Has Scott been made aware of this protocol bug? I'm just running into it myself. Thanks ...
Andrew K1YMI / KC2EUS / GM1YMI wrote... ... If you enable it for WIDEn-N up to two hops, it would respond to anyone using a path of WIDE2-2 or WIDE2-1 or...
Andrew KC2EUS wrote... ... The two lots of settings I suggested would allow it to digipeat either WIDEn-N up to 2 hops or WIDE1-1 only, as well as digipeating...
... Doh! Lord only knows how I made that mistake. And throughout the entire article. I've fixed the article, and I'll redo the graph this evening I'll also try...
Sorry for the double post last time. I did not think the first had gone through. Ok I've got it now. If I set it to a fill-in with WIDE 1-1 I think I should be...
Hello Scott, I'm going to place my T2-301 in another box with a Tx/Rx LED, a 'Beacon now' push button and profile select switch on the front. 1. Is D4 as...
... And have you confirmed that the T2 can/is actually DECODING the VX-8R? If it doesn't decode (verify by hooking up a PC and running TEXT mode), then it...
... Buit if you leave the T2 set up as a WIDE1, you will definitely be "spamming"; the network as you drive it around town. It will be a WIDE1-1 digi full time...
