I have an opentracker+ and I know it gets it's power from the serial/ radio connector. Can the Tracker2 be powered in the same way? Or does it need power to...
Scott - does the Kenwood HT to RJ-45 cable for SR-71 also fit the OT2m? https://www.argentdata.com/catalog/product_info.php?cPath=27&products_id=100 73 es cul...
Hi, While trying to reprogram my OT2M,I get an error message "unable to erase block at 0xf400".Then am told that OTCONFIG cannot write to OT2M.Any help would...
hi all i wonder iff someone have just install one proble for the outside temperature?? i just need to know the temperature outside the OT+ closure,,, i will...
I wanted to send a thank you to all of you on this group. I am a HAM in Bethel, AK (way out in the bush), and our local club is working to enable APRS in our...
Unfortunately, no. The OT+ only supports GPS input in NMEA format. If you wish to use a Nuvi with an OT+, you will need to get the Gtrans cable with DB-9 ...
I just had an idea... I've already written the code to process four buttons on one ADC input, but adding a few more buttons would be easy. I could assign some...
Sounds like you are on the right track. Definetly want to be able to read humidity....and a good weather tight case with the ability to handle high temps. The...
Is there a way to test to see of the T2 is sending a acknowledgement to the message sender? Currently persons sending me messages say they never get an...
Hi, I'm trying to set up a OT2 and a LaCrosse 2315 weather station.Im testing it using my home station so I know the weather station is putting the data out.I...
I've been promising a weather station kit for a long time, but I've just about given up on making it a do-it-yourself kit. There are only so many through-hole...
Scott: I noticed that it looks like the TOCALL for the T2 was changed from APOT2A to APOT21 some time ago. Do other versions (T2-135 and T2-301) have...
My long-suffering T2-135 may have bit the dust. Can anyone give me a read on this? It's installed in the Alinco radio, set to the APRS channel with the modem...
Greetings, Ok, I'm now happy with my T2-135s (KJ4ERJ-9 and KJ4ERJ-14) but would like to start tinkering with some firmware changes. Is there a reference page...
How much current will the power pads on the Tracker support? I will probably use the pads to control a relay to power everthing at the same time. Ron WR5RR...
So as things go I ended up with 2 Nuvi 350 and 2 of the Garmin cables that plug into the Argent unit. I also ended up with 2 of the Argent units but I keeping...
Have the OT2m connected to my Nuvi 680 via the FMI cable. APRS stations show on the map and in the favorites list. What I don't understand is that I don't see...
When testing the board in diagnostics, with otwincfg, the red and green and leds are reversed. When the Alinco receives a signal no led illuminates. I can hear...
Hi Scott (or anyone with an LCD), Is there a boot screen that is sent to the LCD on power up? I finally wired one up and it is blank on the bench without a...
I am still working out all the bugs. I think that I have the FT-60 and OT2m talking to the Nuvi. The OTm is sending position reports, which I can see at...
It would be great if the OT2m manual identified the default position of each of the jumpers on the circuit board. If it is in the manual, then I missed it -...
I wonder if I am missing something. It seems to me that there is no way to disable profile switching or change enable/disable parameters in command mode....
