I am KL2RA, but have no APRS activity to show right now. The only thing we have at this point is a placeholder for AL7YK. We are lucky that one of our...
... As John N5TIM showed, UIView doesn't support a Wx Stn directly, it's only by the use of a 'shim' program dropping a file containing the correctly formatted...
Spencer KL2RA wrote... ... A nice addition for the T2-135 would be a Garmin Nuvi 350 and the Garmin 010-10813-00 Mini-B Data Cable. That would give you two way...
hi all i wonder iff someone have just install one proble for the outside temperature?? i just need to know the temperature outside the OT+ closure,,, i will...
I'm trying to set up a WIDE1-1 fill-in digipeater at my house. I found instructions for this setup many times over in the list archives, but it's not...
The 010-10813-00 Mini-B Data cable converts the TTL level data from the Nuvi to RS-232 data levels, but leaves the data in Garmin Binary format. The Gtrans...
Scott is there a shematic somewhere to show me how,what cable,,to connect too what pinn on the OT+? Thanks Scott for all your effort in APRS . gervais ve2ckn ...
... This sounds very much like the problem I was having. Using the 144.350 MHz 9600 baud network here (comprised of mostly D700/D710 digipeaters in packet...
Unfortunately, no. The OT+ only supports GPS input in NMEA format. If you wish to use a Nuvi with an OT+, you will need to get the Gtrans cable with DB-9 ...
Hi, While trying to reprogram my OT2M,I get an error message "unable to erase block at 0xf400".Then am told that OTCONFIG cannot write to OT2M.Any help would...
Scott DS18S20, i thaught that i could fix it somewhere on the snowmobile ,,,,with some tape ot tye-rap and wire it ,,and connect it at the OT+ ?? i am wrong...
The OT1+ only uses the DS18S20 in weather mode. The T2 can use a DS18S20 as an external sensor. The easiest thing for the OT1+ is to remove the LM335Z and...
well i will leave my OT= as it is ,,,since i dont have the eyes my broken one,,,i wont try too dismantle the brand new i juste received today for my...
Hi Scott, I deleted the OTCONFIG,and downloaded it again,and it worked.Not sure if its related,but am having trouble in keeping my location from jumping...
Scott - does the Kenwood HT to RJ-45 cable for SR-71 also fit the OT2m? https://www.argentdata.com/catalog/product_info.php?cPath=27&products_id=100 73 es cul...
I have an opentracker+ and I know it gets it's power from the serial/ radio connector. Can the Tracker2 be powered in the same way? Or does it need power to...
... Yes, the Tracker2 can be powered through the radio port, pin 7, same at the OT+ I'm running a Tracker2 this way now. My radio has 13.8V output available on...
