Yeah, it fits - the through-hole T2 beta boards are model OT2m. Now I just have to come up with a sticker so I can tell which of these anonymous black boxes...
... You've got the OT2m. Case fits either that one or the OT1m, which is the OpenTracker1 through-hole with the power-switching FET onboard. -- Curt, WE7U....
But only Curt has the armored variety. =] I mis-specified the thickness on the prototypes, and they came out about 50% thicker than the production version. I...
I looked though the archives, and outside of "Before Dayton", I was wondering what the estimated time of arrival for a finished OT2 might be, and what the...
... If you could roll a KPC-3+ and a TNC-X complete with XDigi and Xtracker (which is impossible, it's either-or) all into the same box, the T2 as-is (in beta)...
Actually the VN920 chips I'm using now are rated at 30A. I think that'd be pushing it for heat dissipation though. _____ From: tracker2@yahoogroups.com...
I've been hoping to get a kit out this month. The firmware's coming together pretty well, but I want to do some more testing to make sure the packet decode...
Still debating on the price. I want to have *some* assembled version available for somewhere in the $60-$70 range, but it's going to be easier to pull that...
... Please do have some assembled versions available. I'm just an "appliance" operator. <smile> Mind you I have soldered my own cable and power ends....
The main consideration is of course the cost of the parts and labor (not counting mine) for the kits. If I was going solely on a business mentality I'd be...
I want to start with kits because it's a lot easier to rework a kit than an assembled board. Once I've got a fair number of units in regular use I'll feel...
... Fair enough. I had asked a local ham if my next to non existent soldering skills would be sufficient to do the TNC-X. (This was before I found out about...
... 1) Newsgroup Answers MDB - I designed the MDB to assist frequent newsgroup answerers, such as MVPs, in quickly locating and pasting in their favourite ...
Thanks very much, Scott. I, for one, sure do appreciate all the work you have done and are doing for APRS. FB! Yes, a lot of "appliance operators, like...
Actually I think that it's set to digipeat on MYCALL by default. The logic there is that no one's likely to use you as a digipeater accidentally, but if they...
... Add $20 to the TNC-X for the digipeater daughterboard. And I suspect the X-Track daughterboard as well. So that's another $17. So yours should be at...
... I think that Scott should have a separate "donate" area for people who feel the product is too cheap. Go ahead, Tony, drop in as many shekels as you want...
... There's a huge psychological barrier for something that costs over $100. If the raw parts cost is less than that, I'd recommend not going into 3 digits....
I know its me... but I'm overlooking something. My T2 will digipeat, but I can't get a command prompt out of it. I'm using hyper term (I can talk to it with...
I have just finished building by OT2 and everything seemed to go well until I tried to load firmware. I used the Xmodem upload on CRT and it seemed to go ok,...
An update, when I apply power I get a quick flash of green, then steady red. I have not been able to get otwincfg.exe to do anything. Originally I could get...
I just tested it.... put 12v on the rs232 input and saw the downstream side of R5 go low, so that's working.... and right after confirming that Q1 works, I did...
Something else I've noticed that's weird... I have config 1 set for NOT kiss, and config2 set for kiss. Changing jp7 near the front makes no difference of...
Turns out my problem was my old friend hyperterminal. I've replaced it with another terminal, and all is well in SC. arrrrggghhhh!!! next question.... if I...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
