Hello, I have a La Crosse WS-2307 connected to a T2-135 sending weather reports but
this is preceded by a position report that is not required. I've searched...
I am trying to do a single plug setup for the Nuvi. I have supplied 5V to the red wire at the "bump" in the Garmin FMI cable. When it is plugged in, the Nuvi...
Hi Rob, There are a couple of people who have Nuvis that operate properly when powered by the side connector. Mine did power up in FMI mode once, but only...
I have seen the info on the rear cable mod, but could not find the side cable mod. I will take apart the Nuvi, and see if I can figure out an easy fix for...
The issue is that when the nuvi starts and sees power on the side plug it goes into charge mode.. I didn't really explore too much internally as I've been...
I'm not sure but I suspect from looking at different Nuvi PCB pictures that have been posted (the most obvious difference being that in mine the PCB has many...
I really I am not what is going on. I show up just fine here http://www.openaprs.net/ zip code 66071 or KD0FBK-1 I have noticed that on the other link several...
This has "bugged" me for last several months, but I was too lazy to bring it up. For us "senior" folks who keep switching between profiles because we think we...
If your in there "tweaking" and fixing otwincfg.exe, I'm not sure if this is the best place to suggest it, but possibly could you add the ability to enter or...
I think I've got the rounding errors in the profile screen fixed - they should now stay at the closest value and not drift as they're loaded and saved. I'm...
Catching up on email... Finding the source for the connector was actually really easy. The FMI cables from Garmin have an 'HRS' logo on them that I recognized...
Thank you, I sent the message from the Nuvi and it seems to have fixed it, that is great. I went back into otconfig and I had the k / in the wrong boxes....
Scott - as mentioned over on the APRS SIG, I've been able to enter SETPOWER 0 to 99 in a T2-301 without any problems this time around with build 54740. On your...
I'll float an idea to see if anyone else could use them... a dirt cheap Ethernet to serial adapters. A clone of the Lantronics devices. These would let us...
Great idea! I would like to see these as well in the lower price range. I did see them in NutsNVolts, but I recall around the fifty dollar range. With the...
... There are small modules that look about like extra-long RJ connectors that have a Linux computer built-in and as I recall were in the $30 range. I have...
I've seen a number of devices like you describe. Picotux, NetSilicon, etc. The cheapest I could find is in the $99 range. If you know of a $30 one, I'd be...
I believe it is called a gum stick Russell L. Tower kf4jun Alpharetta (Johns Creek) GA _____ From: tracker2@yahoogroups.com [mailto:tracker2@yahoogroups.com]...
Hi boys and girls, There is one problem that no one has addressed when using the FMI cable to power the Nuvi and that is the cable power and ground wires are...
The Gumstix start well over $100 for one with no Ethernet connectivity. I doubt that's it. I'd also love to know the info on one sub-$50, and if Scott can find...
Looks like I cannot count, saying four wires instead of five in the cable: red, yellow, black, green, and white. Sorry about that. Obviously there is a caveat...
I've been following this post with considerable interest. Has anyone reading this chain actually dissected the Garmin FMI cable and prepared a schematic...
I think I've got all of that in various chicken scratchings on multiple notepads, plus some microscope camera pictures of the PCB itself. If I can find all of...
Does anyone know how much current can be passed through pin 7 of the radio connector on the tracker 2? Or more to the point, how about the trace on the PCB? My...
I had a non-group email from a colleague telling me the white and green wires are 28 gauge and not 26 gauge. Its just that the insulation thickness is...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
