Ah, got it. I've been avoiding that by making my changes to Profile 1, hit the Profile 2 tab, copy from Profile 1, add (P2) to the status text and THEN write...
Lynn KJ4ERJ wrote... ... Adding P2 to the status text in profile 2 is a good idea. Speaking from experience, profile switching is only confusing when the user...
Yeah, but some other command might be trashing the profile switching configuration when you use it. I probably just set mine up to test something, but I'll be...
BlankSunday afternoon and I attempting to programme the Tracker2. Downloaded the .exe file, connected the Tracker2 via a USB-Serial from TinyTrak plus the null...
... a ... bps. I ... otwincfg.exe ... it, you ... tried ... Keith, Thanks - it was still in garmin mode. so here is wat happens in Tera Term cmd:amode auto ...
... I've also noticed that none of the incoming messages get a date/time stamp on the nuvi. I do get a date/time stame when I send Version. the response gets...
Try "Disable Turbo". Try cycling the power to the OT2m. I think you have it right otherwise. ... Downloaded the .exe file, connected the Tracker2 via a...
Scott KB8NUM wrote... ... That would be normal. It didn't receive a signal. You didn't tell it to transmit. There isn't a GPS connected... or is there? I have...
Been having erratic and intermittent operation of the unit when using it in kiss mode. I have done some testing and a kpc3+ & a PK-96 work flawlessly. ...
Hello, Has anyone used the FT-2600M with opentracker successfully? If so, do you use the MIC input or the DB9 in the back (the one thats used for TNC) Thanks...
The T2 needs at least a few mV of signal. The ACT LED blinks when the T2 thinks the channel is busy, based on whatever your carrier detect mode is - energy...
... it to ... 135 ... is set ... to ... However ... to "normal". ... APRS ... OFF, it ... remote ... will ... on... ... you ... it will ... output ... to ... ...
A buddy of mine just bought a Tracker2 and I helped him get it working with UI-View in KISS mode. Problem is, it seems to drop out of KISS mode every day or...
... Hi, Vicky. I have had really good success with my OT+ and an FT-2600M. For one public service event, we ran it on an ATV with a power pack and it worked...
Hello Randy, Thank you VERY much for such a detailed email. Much appreciated. I am going to be hooking this up to a Nuvi 350. Hope that works out well. Any...
... No problem, Vicky. I run a Nuvi360 / OT2m with an FT-8900 in my car as my full time APRS mobile. The Tracker2/Nuvi combo is rather nice. First off,...
Just to keep people thinking, here's a picture of the nuvi's main board with the test points all id'd... http://www.winston1.net/gps/DSCF6214.JPG p ... ...
I will try and update the "full instructions" today if time permits. I modified a second Nuvi350 over the weekend and added the headset jack mod to it. I also...
Jason KE4NYV wrote... ... What does he have entered for the "into KISS" and "exit KISS" settings? I reliably use... Into KISS... ^C^C^C (or 003,003,003) ...
... I have "leeched" power off of a serial port before to power an ST202, but that was about it. Took power from the RTS and DTR lines to a large cap. Pretty...
Scott, After reading the notes recently about receive variability I am curious if you have tested the receive performance on different versions of the DR-135. ...
If I recall correctly, the rs232 spec says there is a 300ohm resistor in series with each output pin. It's a current limiter by default. Should give about...
I've only got Mk II units here. I haven't seen any correlation yet between model and RX performance. The OT2m has a clipping circuit very much like the...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
