Is there a file somewhere giving the configuration settings needed to use this T2-135 board as a stand alone APRS system? Same question about the software...
You don't need anything else, just the DR-135T radio and the T2-135 board. The configuration program can be found on the Argent Data Systems website. The...
... Dennis, I see you found the Tracker2 group. In addition to Rudolph's comments, I'll suggest that you make sure that the Profile 1 and Profile 2 settings...
Thanks. But I have all that. I have re-installed the firmware a dozen times and then started all over with the configuration program and the terminal to make...
In order for APRS.FI to see it, there has to be an IGATE that hears it or is in the path. Look for VE3BDR-4, its a DR-135/T2-135. It shows up in the wrong ...
Dennis K5GBT wrote... ... Looks OK, but I see that you have a fixed location entered even though you are using a "car" symbol, and you are outputting received...
It appears MTMAG is clearly in range. I think that rules out an IGATE being close enough since the K5GBT-9 station appeared to work fine. Do you have a way to...
Took your advice and increased TXdelay from 100 to 150. VE3BDR-4 Solar Digi (experiemental yet). Digi shuts down if temp and/voltage drop below setpoint. Tx...
Dennis, Yes, you can hear the data packet on another radio, but can a Digi and eventually an IGate hear the packet? Where are you located and what Digi/IGate...
Just a quick update on Vantage Pro weather station support... thanks again to Mike Wren for the loaner unit I've been using for testing! I've got it working...
OK. I have changed the TXdelay to 200 and changed the Bbaud to AUTO. That fixed it. Thanks to everyone who helped. It is sometimes the simple things that get...
... Good to know you have it working... not that I really want to pee in your cornflakes, but that local digipeater on Magazine Mountain is going to be a pain...
Hello to all, I just purchased a T2-135 and received it in the mail today. I've gotten it installed and configured and it seems to beacon just fine. However,...
I've been using the Tracker2 paired with a Garmin nuvi 350 for a few months now and have found it to be an excellent setup. Now I'd like to configure the...
... What interface do you have configured in Xastir? If you've set up AX.25 kernel networking configured/working then you should use "AX25 TNC" in Xastir....
... I've been using the Serial KISS TNC ... The laptop I'm trying to hook to it doesn't have AX25 configured (yet) - I've got another station running in that...
... Yes, using a kiss-mode TNC. I've done this for a long time with a variety of TNC's w/Linux. I'm not currently set up in this manner 'cuz I don't need to...
... To add to this: Soundmodem creates the ax25 network interfaces (sm0 or ax0, etc.) when it is running. The Linux AX.25 subsystem picks a line from the ...
Note also that the Tracker 2 KISS mode isn't completely "KISS" standard and it's possible that existing KISS operations or commands may either not work or lead...
It shouldn't cause any unexpected behavior, it just ignores those commands. TXDELAY is the only one that's really relevant for APRS anyway - just remember to...
... When you say "set that manually" - I haven't yet seen a process to do so, what all does that require ?? I know that is something I looked at adjusting; but...
... And knowing that, I wondered if that may be part of the issue here. My curiosity is partially rooted in simply knowing if anybody else had made KISS work...
On Tue, Dec 2, 2008 at 2:04 PM, "Jeremy R. Geeo [KDØEAV]" ... Yes. my proto A T2 worked just fine in KISS mode (until I killed it, but that's my fault and...
My own N1VG-1 IGate runs a T2 in KISS mode. At the moment it's set up as a serial TNC, but previously I had it using kissattach. I think I changed that when...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
