i run a few t2`s with garmin 60CS`s. they do work in NMEA mode, but the station ID`s tend to get jumbled up. Run it in GARMIN mode. ou can access the mode...
Yes. I am now in Garmin mode with 9600 baud selected (still has the autobaud selected). Here is a screenshot what was my configuration before changing Serial...
... that's the T2 mode; the GPS unit also has to be in garmin/9600 mode. The GPS doesn't have an "auto" mode, so it has to be set manually. The GPS will do...
... I run a GPSMap 60Cs with at T2-135. Unfortunately, running the 60Cs in Garmin mode results in the "bread crumb" waypoint problem and the display quickly...
yes the garmin is also in Garmin Mode. And the tracker unit is TX so that part is working. And the LED for the RX is lightening up as well. ... the ... ...
Perhaps this is not really the proper forum for this question, but here it is anyway. Does anyone know what the steps are to load/install custom symbols in my...
Thats wierd. Ive made a few trips with mine 1000+ miles and never had a single bread crumb. I started out in NMEA mode and had the bread crumb problem and a...
The Garmin unit is set to UTM with WGS84. I assume since it is providing the data to the tracker, that it should also be recieving. Can I exclude the Garmin...
... Hi Scott, Tnx for the quick response! At home I use the OT2 in place of my KAM+ with my Icom 28H or my old Yaesu 207 HT. Both take grounded PTT and work...
What are your settings for the 28h (squelch, volume, etc)? I've spent a little time playing with mine and can't seem to get RX to work reliably... It...
Hi Guys, i have been running the Nuvi350 for a day or so now and got the "My Locations Memory is Full" message this morning. Tried powering down, resetting etc...
Afternoon Scott, I received my OT2 and parts the other day (in a order from VE6SBS) thank you, I guess I have to get James his unit back now... A quick...
Is the capability to "only display waypoints within a particular range" a Tracker2 capability or a Nuvi350 capability? I ask because I don't presently have...
I keep a waypoint file so reloading my GPS is easy. First, I delete all waypoints in GPS [GPS function], then load the waypoints back in. I use ExpertGPS for...
I don't know how if many GPS units allow deleting waypoints from the communication port. It appears Garmin mostly does not. I say mostly because maybe the...
The ability to set the range of stations (in miles) that populate the Nuvi is a T2 feature...I believe the command is "maxrange" if I remember correctly. I use...
It's the interface mode that matters - should have options for NMEA IN/OUT and GARMIN. Yes, you can just connect to the T2 using a comm program. Make sure ...
... Yes, it should activate the relay. The otwincfg instructions haven't kept up with the program - I've been debating whether to make that part of the T2...
... It's the MAXRANGE command on the T2. ... Only there ARE no 'delete waypoint' commands. I've been begging for one for years now. ... 10 callsigns would...
... Not presently. I'd have to think about the best way to do that. Could be just an ON/OFF option to disable position packets if weather data is available....
Tnx Fred, Some success here... You are right deleting waypoints is a GPS function but with the Nuvi350 I have to delete from "My Favorites" each location...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
