It would be great if the OT2 could detect whether the GPS connection were Garmin or NMEA. I realized that I had forgotten to set my GPS to Garmin mode after I...
The difficulty there is that they generally run at different baud rates, and Garmins won't talk on their own - you have to send a command to start the ...
SEND command with no parameters will now show if you have an outgoing message pending. DEVLIST command now works properly if there's nothing connected to the ...
More changes... LIST has been changed to DISPLAY for consistency with the KPC-3 HEADERLN will split the MONITOR text between two lines RETRIES sets the number...
On May 2, 2006, at 12:20 AM, <scott@...> ... the standard for this one is ^U, isn't it? that's what still works on unix, and what i vaguely remember...
... Yes. Control-U. I use it all the time. -- Curt, WE7U. APRS Client Comparisons: http://www.eskimo.com/~archer "Lotto: A tax on people who are bad at...
... It should show everything as long as MONITOR is enabled. ... Done. ... Hmm, that'd be because it doesn't pass packets to the APRS parser in KISS mode. I'm...
Fixed the problem with the unit not processing command messages in KISS mode. Also, there's a FAHRENHT option now if you want your temperatures reported in...
... More new features... :) How're you shaping up for Dayton? Cheers de John EI7Ig ___________________________________________________________ Switch an email...
... I'll check again over the weekend, but it seemed to be showing all other packets on the air except what it was digipeating. ... Cheers ... I was just...
... I don't think there's any way I'll have T2s in production by then, but I'll at least have stuff to demo. The metal cases, too, aren't going to be done ...
... No worries... at least you have a plan! I'll be back in the country by Dayton, I can quite easily leave the T2 running if you want to 'ping' it as part of...
I've got two prototypes built now, and I think I've fixed the oscillator problem. The resistor values given in the MCU datasheet didn't match the crystal...
Lots of internal changes and bug fixes in this version. I think the only change visible to the user is the status command - it now displays packets received...
I've thought all along that the T2 really needs something more flexible than the 2-config switching setup, but I haven't settled on exactly what that's going...
I was digging around today looking for a IPS5451 to go on my OT2 Beta. I found that mouser has a device (Mouser P/N 511-VN920) made by STMicroelectronics that...
As an experiment, I replaced the TX pot in one unit with a DS2890 1-wire digital potentiometer and added a TXLEVEL command to control it. It works - and only...
How about when voltage >x.x then change callsign to xxYxxx when voltage >xxx.xx <yyy.yy then change callsign to xxzyyy Gives the ability to create objects that...
There are enough digital inputs available that you shouldn't have to worry ... Having outputs execute console commands wouldn't be hard, though they'd need to...
Scott, would you consider changing PATH to UNPROTO to keep in-line with the TNC2 standard? Such as UNPROTO APRS VIA WIDE1-1,WIDE3-3 or UNPROTO APRS V...
... I'm not sure I follow you. What do you mean? ... Agreed, makes no sense to me either. I guess I was just thinking about compatiability. Not just with...
