Scott and others looking at this, I'm out at CDRVLY this weekend, looking at the logs more carefully. I still see problems in APRS-IS with garbage at the end...
... The X-digi has a few problems. The one I saw the most when running it was it completely trashed the path of the packet it was repeating every so often. ...
... I'd say go ahead use a UI-View temporarily to monitor the packets and do igating. See if there is a difference. On my setup, I don't see any trailing...
No, not at this point - it doesn't do any parsing of the KISS frames. Might not be too hard to do, but I'd have to make sure it didn't interfere with the digi...
Would be very useful for me to access/control a remote T2 that is connected to the only igate near it :-) The message goes out to RF from the IGATE, via the...
... Not really an option for me, since the T2 is connected to a WRT. But I know other people are running into this problem, too, perhaps they can debug further...
... Ok, I was bored this afternoon so I thought I want to duplicate your problem on my T2 that is acting as a digi, TKUSIR. My T2 (actually a T2-135) is...
We are having cable issues hooking the ot2m board to the vx-2r. The ot2m indicates it is trying to transmit but the radio never enters a transmit state. The...
hello, We are attempting to hook a vx-2r to a ot2m prototype e. We receive data through the radio but cannot get the ptt to work and send info out. The ot2m...
We resolved this issue by building the HT4C cable shown on Byonics site, then adding a 1K resistor between the Mic Audio In (Pin 1) and PTT Out (Pin 3) and...
This is a wonderful APRS event to attend: <http://nwaprs.info/sg.htm> -- Curt, WE7U: <www.eskimo.com/~archer/> XASTIR: <www.xastir.org> "Lotto: A tax on...
Recieved my unit. updated the configuration with my call-sign and garmin gps. I see the RX and ACT leds flash red every cycle. and the radio transmits out....
Listen to your transmission on another radio if you can. Make sure there's audio there, make sure it's not overdeviating. Can you hear the nearest digipeater...
Chris (callsign???) wrote... ... You could start by telling us your callsign, your approximate location (are you within range of an IGate or a digi that can be...
I wrote... ... That should of course have been "but you don't give us much to go on" hi! 73 es cul - Keith VE7GDH -- "I may be lost, but I know exactly where I...
Callsign: K9RMA Location: Bothell WA 98011 I do hear other stations. GPS is locked. I'll listen to my TX on another radio tonight. I do not have another TNC....
Look on the web for agwpe This package uses your soundcard for the TNC. I have successfully decoded packets by having my portable sitting next to the laptop...
Chris K9RMA wrote... ... I tried http://map.findu.com/K9RMA* (note the asterisk) and it doesn't like your callsign with any SSID has made it to an IGate. Now...
... http://aprs.he.fi will give you a great map of local activity, as well as some data mining that is not available on findu.com http://www.db0anf.de/app/aprs...
Hi all. I am the communications lead on a student-run high altitude balloon project, and we are considering a new TNC. I was sent here by Gary Dion, N4TXI,...
... what sort of restrictions? ... why NMEA format? That is the most inefficient position packet type in terms of bandwidth. Bandwidth also equates to power...
... Digipeater capability is no problem. The T2 doesn't output GPS telemetry over the air in NMEA format - it's too inefficient and makes you choose between...
... By complete communications subsystem, does that include things outside of the APRS tracker? ... The OT2 will do what you ask, but as others have indicated...
... I did run a digipeater on 144.39. I think I had QUIET set to 0, though, so it'll ignore the fact that the channel is busy. SWDCD should be ON. I was...
I guess I should clear up a few things: I meant that the GPS input would be NMEA protocol. Output from the TNC to the radio is (I assume) AX.25 standard. Also,...
Ok. NMEA input is fine, of course. As I mentioned, Garmin binary mode will give you vertical speed, but you'll also get estimated position error rather than...
Okay, I just received my proto E board (thanks for your patience on the bad address, Scott) but I didn't get any docs with it. That's not a big deal, I know...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
