Now the next question, how to get out of this mode? I set the Tera Term program to 2400 bps, but couldn't get the prompt back. Now, unfortunately I don't have...
Then you probably need to use the otwincfg program. I can't recall at the moment if there's an easy way to get out of LaCrosse mode - I know I set it up so...
hey Scott, In general, I like it. I'm not following on the APRSSPEC sig, but here are some thoughts: IMO, field separator/identifier characters should not be...
You're right about the field separators - I'll have to think about good values for them. As for field number identifiers, I'd only really thought about it for...
While we are talking about potential new features... Scott, you and I talked at Dayton about a possible firmware change so that the T2-135 will pass GPS...
While re-reading the T2-135 manual last night I noticed that BMODE also has the option for WS2300, now the question is how's one hook the weather station up...
I was just looking at that today, actually. Maybe a PASSTHRU command? Do you want it to blindly pass everything that comes in, or use that port switching...
And electrically it's not going to work either. I've been trying to avoid having to maintain a separate firmware load for the T2-135, so that means either...
Looks like there's a decent amount of space left in that part of memory. There are some constraints on it because it can only be erased a page at a time. I...
... Hi, I'm not sure about the 'big picture', but in general, the most one could have would be one to about 5 objects/repeaters that could be co-located on a...
Put together the new tracker2. I can program it with otwincfg. Write comes back finished. It reads the GPS and flashes red until it locks. Then flashes green...
After giving the Tracker2 a few tests, I too have noticed the bug where positions do not get plotted as a result of the missing "N" or "S" in the $GPWPL...
... turn of flow control in hyperterm, since you're using a 3 wire null modem cable (which won't have the hardware flow control lines). -Jason kg4wsv...
I knew I just wasn't seeing the forest because of the trees. It worked first time. Just couldn't seem to decide what I was doing wrong. I will hook up CTS RTS...
I thought I fixed this - what firmware version are you using? Scott _____ From: tracker2@yahoogroups.com [mailto:tracker2@yahoogroups.com] On Behalf Of k4nnw ...
... Sounds good. Though it would require an update to OTWinCfg to make the new feature complete. <grin> Speaking of which, do you plan to provide access to the...
Not sure how much extra work it would be (or code space), but would it be possible to have the Tracker2 generate NMEA sentences if the GPS were in Garmin mode?...
"I thought I fixed this - what firmware version are you using?" 54085 I saw that you mentioned that you had it fixed. That's why I was so perplexed. Maybe, I...
Not sure if this is the best place to ask, but I'll try anyway. Does anyone know of a low power method of getting APRS data to/from a radio to a TCPIP network...
... There are rs232-to-ethernet and rs232-to-wifi solutions out there - Lantronix has several (www.lantronix.com), and there are others. Using one of these...
I wrote code a few years ago that used a rabbit semiconductor chip (their C compiler and TCP stack), but it couldn't keep up with the aprs stream. Now with...
... Well, how about something like this: http://www.siteplayer.com/telnet/index.html I have never used one, but it sounds like it may work. Also, you have a...
... Check in with the guys at WetNet http://www.wetnet.net and look into the NSLUG. They have hacked the NSLU and put DigiNed onboard. It might do what you are...
I understood that I had a three wire cable, but did not know that Hyperterm defaulted to flow control. This is on the hyperterm setup page where you set 4800 N...
Anyone know of a good freeware terminal program for Windows that I could link to, and maybe include on my driver CDs? I use SecureCRT myself, but it's not...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
