So, I got my T2-135 and installed it. Easy. After a few hours of trying different serial cables and different computers realized I needed to put the DR-135 in...
If you open it up, you should see the LEDs blink at power-up. They may be blinking constantly if the firmware is corrupted. As long as it's still blinking,...
When I start it up I get both the red and green LEDs alternately flashing. If I start the config program and restart the radio/T2 the Green LED is constant on...
Lets see if I can hit the right button this time. Scott were you able to think of anything I could try to get the USB to Serial adapter I purchased from you....
I just answered a recurring question for the umpteenth time on the NWAPRS reflector... How come I see delayed packets. My theory that I am sticking with is...
... I LOVE this idea! I have been hoping for somthing similar myself. You're right, what the digi hears and what we GET TO hear is two totally different...
I have tried every email address that I can find for you several times with no reply. I have an outstanding order and would like to find out the status. ...
... Oh, yeah I forgot to reply to your comment! I wouldn't mind doing that, but I hear that there are going to be at least 2 or 3 other people attending the...
... Uh... ummm... errr... That's a MANLY kinda love, right? <insert lots of Tool Time grunting here> Not that there's anything wrong with the other kind/being...
I'm intrigued by this project, and would like to build one and assist in the beta program, but can't figure out where to order. Also, I'm really looking for a...
hello, I need to connect an OT2 and a gps to my laptop (simultaneously) but i'm unsure how to configure the ot2 to do this and also how to make up the...
... There's a standard? (: Seriously, the DB9 is the closest thing to a standard I've seen. I know the radios use a mini-DIN, but the TNC end is nearly...
I did mount a mini-din connector in my Tracker2, but for the GPS on the second serial port. Have a look in the photos section for a couple of pictures. Album...
I just joined this Group, so please be patient with me. I am helping out in the communications of the Angeles Crest 100 mile foot race north of Los Angeles,...
If you've got a rev C T2, the second serial port is on pins 7 and 8. Ground (pin 5) is the only shared pin. If it's an earlier rev, you'll have to add some...
Hi Jason, Thanks for your reply! Yes, mine is a rev C, so I think i'm in luck, I didn't know about the pin 7 & 8! So do I run the pins 7/8 to the GPS or to...
... transmit from the GPS would go to pin 2 or 8 (that's receive for the T2 port 1 and 2 respectively). I have a rev A board (which doesn't have a connector...
Hey everyone, Just a quick note that Scott is aware that the N1VG and Argent Data sites are down, he's got a trouble ticket in with the hosting company right...
The server is back up. Not sure what caused the problem. Scott _____ From: tracker2@yahoogroups.com [mailto:tracker2@yahoogroups.com] On Behalf Of Keri...
Hi there! I'm actually trying to do the same thing as you, I have the cable made, but I can not get the GPS to talk to the OT2, ie the data doesn't seem to be...
Sorry, been having major computer problems here. What was the order number? Scott _____ From: tracker2@yahoogroups.com [mailto:tracker2@yahoogroups.com] On...
So, I'm (finally) tearing down the extra stuff I rig in the truck for a balloon chase, thinking how nice it would be if I had a T2-135 (and a 135 to put it in...
Too bad there's no power provided to the speaker. And the audio level might be a bit high! Now, putting one in a speaker mic is definitely something I'd like...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
