I bought two tracker 2s almost 3 years ago. I also bought 2 GPS units to go with it. I've been holding out hope that someday a firmware would be released...
Hi All, Spent a few hours on this last night pulling my hair out so I am hoping someone might be able to help. OpenTracker USB connected using the "Tracker...
I was able to get a Garmin 350. Have a T3-301 with cable (serial RS-232). What do I need now to get the setup running? I believe that the 350 has a USB cable...
Good day Scott, What is the maximum mic voltage the OT USB can accept? Actual used mic (headset with electret boom mic) spec mention "supply voltage for...
Hello; I am considering running APRS on my Honda Goldwing and I have a question regarding the connections. The radio is a Kenwood TM-281 and I would like to...
Greetings, Is it possible to use the USB AND the two serial ports at the same time? Also, I see DISPLAY as a Mode option. Is this for a future LCD display? ...
Greetings, In the Tuning/Diagnostics window, clicking on PTT does not light the LED. It does with the older revisions 56132 and 56295. Thanks! Best regards, ...
Been running Argent gear for a long time. My T2-301 and nuvi 350 has been a super package. Been looking and making some gear changes and I need some info on...
Is the OT USB capable of sending out a Fixed position packet while Port A is in the TEXT mode? I am using an Arduino Uno to send a formated plain text...
New beta releases are up (build 56330) for all three products. Fixes include: All: Power relay now switches off after APRS message packets OTUSB: Fixed...
My Setup is using APRSIS32 in KISS mode, and a OT3m v1.1 with a motorla M120 radio. It is setup with external squelch disabled, software dcd enabled. and I...
My OT3m switch to profile 2 without GPS fix after 2-3 hours uptime? Normally my OT3m are sending a beacon every 25 minutes when the GPS is off, Profile 1 has ...
Goto the "Where to" screen, select "My Locations" at the bottom right corner is a delete all button. There is a copy of the nuvi 350 manual in the files...
It seems to be the same problem with power control when digi as for aprs message. I am using my excellent tracker as a digipeater but the power relay stays on...
Anyone on the forum have a LM355Z connected to an analog channel(CN4 pins 3 thru 6)? If yes, I would like to take a look at the raw telemetry data on aprs.fi ...
In about a month I'll be out with a bunch of friends tracking and chasing a high altitude balloon payload across the southwest US. my chase setup will be a...
I have an OT USB that I am using for telemetry. It seems that the telemetry inputs on CN-4 are a bit skewed. CN-4 pin 5 is connected directly to my battery....
Scott I am running an OT3m with firmware 56294 When sending a message with the SEND command the OT fire up the Power Control PS with 12 volt. But when the...
OT2m with firmware version 55076 I have attached a 2x16 display per instructions in the wiki Running as digipeater K0JDD-1 This problem first surfaced about...
Dear All; I do not know if you talked about such a topic but I have a problem with my new otm3. The equipment: I edit the otwincfg file, if you want I can send...
The new minimalist T3 prototypes came in yesterday: http://n1vg.net/t3-dongle.jpg The only connections are the USB port, GPS connector, and 3.5mm plug with...
Hi all, It's a new year and I'm working hard to get a bunch of firmware and documentation stuff done. New beta firmware for both the T3 and OTUSB has been...
I was messing around today to see if I could run the serial data from WS1 into port A of OT2M and have it run as a weather station. I have a different OT2M...
Does anyone have an iambic paddle they'd want to trade for a tracker or store credit? I need one for a project and would rather not drop a bunch of cash on a...
I see that there are two "legacy serial ports" (non-USB) on the T3-135. One is router to the DB-9 on the back of the radio (pins 2/3/5), and one is internally...
