My OT3m switch to profile 2 without GPS fix after 2-3 hours uptime? Normally my OT3m are sending a beacon every 25 minutes when the GPS is off, Profile 1 has ...
Goto the "Where to" screen, select "My Locations" at the bottom right corner is a delete all button. There is a copy of the nuvi 350 manual in the files...
It seems to be the same problem with power control when digi as for aprs message. I am using my excellent tracker as a digipeater but the power relay stays on...
Anyone on the forum have a LM355Z connected to an analog channel(CN4 pins 3 thru 6)? If yes, I would like to take a look at the raw telemetry data on aprs.fi ...
In about a month I'll be out with a bunch of friends tracking and chasing a high altitude balloon payload across the southwest US. my chase setup will be a...
I have an OT USB that I am using for telemetry. It seems that the telemetry inputs on CN-4 are a bit skewed. CN-4 pin 5 is connected directly to my battery....
Scott I am running an OT3m with firmware 56294 When sending a message with the SEND command the OT fire up the Power Control PS with 12 volt. But when the...
OT2m with firmware version 55076 I have attached a 2x16 display per instructions in the wiki Running as digipeater K0JDD-1 This problem first surfaced about...
Dear All; I do not know if you talked about such a topic but I have a problem with my new otm3. The equipment: I edit the otwincfg file, if you want I can send...
The new minimalist T3 prototypes came in yesterday: http://n1vg.net/t3-dongle.jpg The only connections are the USB port, GPS connector, and 3.5mm plug with...
Hi all, It's a new year and I'm working hard to get a bunch of firmware and documentation stuff done. New beta firmware for both the T3 and OTUSB has been...
I was messing around today to see if I could run the serial data from WS1 into port A of OT2M and have it run as a weather station. I have a different OT2M...
Does anyone have an iambic paddle they'd want to trade for a tracker or store credit? I need one for a project and would rather not drop a bunch of cash on a...
I see that there are two "legacy serial ports" (non-USB) on the T3-135. One is router to the DB-9 on the back of the radio (pins 2/3/5), and one is internally...
I had built a cable for my tracker a while back but I found out about the ot3m -- bought it and ready to get it up and running !! I had built it for my htx 242...
Dear All, We are using 2 units of T2s as mountain top WIDE digipeaters for 2M and 70cm. As we are seeing very low usage on the 70cm side, we would like to add...
I operate an APRS station on my boat, which I operate in the coastal waters of California. This is partly a safety feature, but is also practical because it...
I was using the otusb plugged into a 5v usb adapter plug on my vehicle and the power flashed off and on quickly, now the otusb will not light up with either...
I'm experiencing a problem with my T3-301 in that the power LED comes on but the Tx/Rx LED never does. I can transmit over another radio and receive on a...
Hi guys I have the T2-301 and a peet bros 100 Ultimeter WX staion and would like to know has anyone here got the same setup. I can't get the WX info to the...
So I think I've got the radio Rx level set correctly, every so often I'll get a blink of a green light with the profiles set in KISS mode at 9600 baud. If I...
I just stumbled upon this: http://www.joejaworski.com/weather/ I am wondering if the WeatherLink alternative adapter might work via the Troy XCD Serial Server...
I just posted the latest Tracker3 development build (no guarantee of stability!) to the site - use the otwincfg 'web' button if you'd like to try it out. This...
I traded trucks a year ago and am just now getting around to re-installing my setup, which is as follows: Garmin Nuvi 350, powered from separate switching...
